1. Pengenalan
This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Hobart N50-60 5-Quart Commercial Countertop Planetary Stand Mixer. Designed for heavy-duty commercial use, this mixer features a robust gear-driven transmission and three fixed speeds, making it suitable for a wide range of mixing applications. Please read this manual thoroughly before operating the mixer.
Figure 1: Hobart N50-60 Commercial Planetary Stand Mixer. This image shows the complete mixer unit with the stainless steel bowl and a whisk attachment.
2. Arahan Keselamatan
WARNING: To reduce the risk of serious injury, always follow these safety precautions.
- Baca semua arahan sebelum mengendalikan pengadun.
- Ensure the mixer is placed on a stable, level, and dry surface to prevent tipping.
- Always unplug the mixer from the electrical outlet before cleaning, assembling, disassembling parts, or performing any maintenance.
- Keep hands, hair, clothing, and utensils away from moving parts during operation to prevent injury. Never use your hands to scrape the bowl while the mixer is running.
- Do not immerse the mixer base in water or other liquids. Clean with a damp kain sahaja.
- Gunakan hanya lampiran dan aksesori yang disyorkan oleh pengilang.
- Do not operate the mixer with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact qualified service personnel.
- Pengawasan rapi diperlukan apabila sebarang perkakas digunakan oleh atau berhampiran kanak-kanak.
- Pastikan bekalan kuasa sepadan dengan voltage specified on the mixer's rating label (100-120V/2.9A or 230V/1.4A).
- Never attempt to bypass safety interlocks or modify the mixer.
Rajah 2: Belakang view of the mixer, highlighting the power cord connection and a warning label. Always ensure the power cord is in good condition and properly connected.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Hobart N50-60 Planetary Stand Mixer Unit
- Mangkuk Pengadun Keluli Tahan Karat 5 Sukuart
- "D" Wire Whip (Balloon-shaped)
- "B" Flat Beater (Cast Aluminum)
- "ED" Dough Hook (Cast Aluminum)
4. Persediaan
- Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Simpan pembungkusan untuk pengangkutan atau penyimpanan masa hadapan.
- penempatan: Position the mixer on a sturdy, level, and dry countertop or work surface capable of supporting its weight (approximately 55 lbs). Ensure adequate clearance around the mixer for ventilation and operation.
- Pemasangan Mangkuk:
- Lower the bowl support by pulling the hand lever located on the side of the mixer downwards.
- Place the 5-quart stainless steel mixing bowl onto the bowl support, aligning the pins on the support with the slots on the bowl.
- Raise the bowl support by pushing the hand lever upwards until it locks securely into place.
- Pemasangan Lampiran:
- Ensure the mixer is OFF and unplugged.
- Slide the desired attachment (wire whip, flat beater, or dough hook) onto the agitator shaft until it clicks into place. Rotate the attachment slightly if needed to engage the pin.
- Gently pull down on the attachment to ensure it is securely locked.
- Sambungan Kuasa: Plug the mixer's power cord into a grounded electrical outlet that matches the mixer's voltage keperluan.
Rajah 3: Depan view of the mixer with the whisk attachment and stainless steel bowl correctly installed. Note the bowl lift lever on the right side.
Rajah 4: Jarak dekat view of the 5-quart stainless steel bowl and the whisk attachment, showing how they connect to the mixer head.
5. Arahan Operasi
- Tambah Bahan: With the mixer OFF and the bowl in the raised position, add your ingredients to the 5-quart stainless steel mixing bowl.
- Pilih Kelajuan: The N50-60 features a three-speed transmission. Use the speed selector lever (typically labeled 1, 2, 3) to choose the desired mixing speed. It is generally recommended to start at a lower speed and gradually increase as needed.
- Mulakan Pengadun: Press the large ON button to start the mixer.
- Pencampuran Monitor: Observe the mixing process. If necessary, stop the mixer, scrape down the sides of the bowl, and restart.
- Hentikan Pengadun: Press the large OFF button to stop the mixer.
- Remove Bowl and Attachment: Once mixing is complete, ensure the mixer is OFF. Lower the bowl support using the hand lever. Carefully remove the attachment by pushing it upwards and then sliding it off the agitator shaft. Then, remove the mixing bowl.
- Manual Reset Switch: In case of an overload or electrical issue, the mixer may automatically shut off. Locate the manual reset switch (often a small button on the mixer body) and press it to reset the circuit. If the issue persists, unplug the mixer and contact service.
Rajah 5: Sisi view of the mixer, illustrating the location of the speed selector lever (1, 2, 3) and the prominent ON/OFF buttons for easy operation.
6. Penyelenggaraan dan Pembersihan
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hobart N50-60 mixer.
6.1 Pembersihan Harian
- Sentiasa cabut plag pengadun sebelum membersihkan.
- Mangkuk Campuran dan Lampiran: The 5-quart stainless steel mixing bowl and the included attachments (wire whip, flat beater, dough hook) are dishwasher safe. Alternatively, wash them with warm, soapy water, rinse thoroughly, and dry immediately.
- Badan Pengadun: Lap bahagian luar pengadun dengan iklanamp cloth. For stubborn stains, use a mild detergent. Avoid abrasive cleaners or scouring pads, as these can damage the Hobart gray hybrid powder enamel finish. Ensure no water enters the motor housing or electrical components.
- Hab Lampiran: Clean the attachment hub area to prevent food buildup.
6.2 Penyelenggaraan Am
- Periodically inspect the power cord for any signs of damage. If damaged, it must be replaced by a qualified technician.
- Ensure all moving parts operate smoothly. Do not attempt to lubricate internal components unless specified by the manufacturer.
- Keep the mixer in a clean, dry environment when not in use.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your Hobart N50-60 mixer.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengadun tidak dihidupkan. |
|
|
| Pengadun berhenti semasa operasi. |
|
|
| Attachments are difficult to install/remove. |
|
|
| Bunyi atau getaran yang luar biasa. |
|
|
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | N50-60 |
| Jenama | Hobart |
| Kapasiti | 5 Quarts |
| Dimensi Produk (D x W x H) | 15"D x 11"W x 17"H |
| bahan | Aluminium, Keluli Tahan Karat |
| warna | Gray (Hybrid Powder Enamel Finish) |
| Bilangan Kelajuan | 3 Fixed Speeds |
| Voltage | 100-120 Volts / 230 Volts |
| Wattage | 348 watt |
| Jenis Kawalan | Button (On/Off), Toggle (Speed) |
| Bahan Bekas | Keluli Tahan Karat |
| Dishwasher Safe (Bowl) | ya |
| Komponen yang Disertakan | Mixer, 5-Qt Bowl, Wire Whip, Flat Beater, Dough Hook |
| Pensijilan | UL listed, NSF certified |
Figure 6: Dimensional diagram of the Hobart N50-60 mixer, showing its height (17"), width (11"), and depth (15").
9. Maklumat Waranti
Warranty details for the Hobart N50-60 Commercial Planetary Stand Mixer are typically provided with your purchase documentation or can be obtained directly from the manufacturer's official webtapak. Sila simpan bukti pembelian anda untuk tuntutan waranti.
10. Sokongan
For technical assistance, spare parts, or service inquiries, please contact Hobart customer support. You can typically find contact information on the official Hobart webtapak atau melalui pengedar sah anda.
Visit the official Hobart Store for more information: Hobart Store