Seiko Clocks QHR201S

Seiko Clocks QHR201S Alarm Clock User Manual

pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your Seiko Clocks QHR201S Alarm Clock. This analog alarm clock features radio wave control for accurate timekeeping and a convenient backlight function. Please read this manual thoroughly before using your new alarm clock.

Maklumat Keselamatan

  • Jangan dedahkan jam kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
  • Elakkan daripada menjatuhkan jam atau mendedahkannya kepada hentaman yang kuat.
  • Jauhkan jam daripada medan magnet yang kuat.
  • Jangan cuba membuka atau membaiki jam sendiri. Rujuk kepada kakitangan perkhidmatan yang berkelayakan.
  • Buang bateri terpakai mengikut peraturan tempatan.

Kandungan Pakej

Sila pastikan semua item ada dalam pakej:

  • Seiko Clocks QHR201S Alarm Clock
  • 1 x Bateri AA
  • Manual Pengguna (dokumen ini)

Produk Selesaiview

The Seiko Clocks QHR201S is a compact, modern analog alarm clock designed for clarity and ease of use. Its radio wave control feature ensures precise timekeeping.

Seiko Clocks QHR201S alarm clock, front view, silver casing with white analog dial, black hands, and a button on the top right.
Rajah 1: Depan view of the Seiko Clocks QHR201S Alarm Clock. The clock features a silver rectangular casing, a white analog dial with black hour, minute, and second hands, and clear black numerals. The text "SEIKO" and "RADIO WAVE CONTROL" are visible on the dial. A circular button is located on the top right of the casing.

Key components include the analog dial for time display, control knobs/buttons (typically on the back or side) for setting time and alarm, and a top button for backlight activation and snooze function.

Persediaan

1. Pemasangan Bateri

  1. Cari penutup petak bateri di belakang jam.
  2. Tanggalkan penutup dengan menggeser atau mengangkatnya.
  3. Masukkan satu bateri AA, pastikan terminal positif (+) dan negatif (-) sejajar dengan tanda di dalam petak.
  4. Gantikan penutup petak bateri dengan selamat.

2. Initial Time Setting (Radio Wave Control)

Upon battery installation, the clock will automatically attempt to receive the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength. During this time, the hands may move rapidly until the correct time is set.

  • Letakkan jam berhampiran tingkap untuk penerimaan isyarat yang lebih baik.
  • Elakkan meletakkan jam berhampiran peranti elektronik yang boleh menyebabkan gangguan.
  • Once the signal is received, the clock will automatically adjust to the correct local time, including daylight saving time changes.

Arahan Operasi

Menetapkan Penggera

  1. Locate the alarm setting knob, usually on the back of the clock.
  2. Putar tombol untuk menggerakkan jarum penggera ke waktu penggera yang anda inginkan.
  3. Locate the alarm ON/OFF switch (often a small slider or button). Set it to the ON position to activate the alarm.

Menggunakan Lampu Latar

Press the button located on the top right of the clock casing to activate the backlight. The backlight will illuminate the dial for a few seconds, allowing you to read the time in low-light conditions.

Fungsi Tunda

When the alarm sounds, press the top button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).

Menghentikan Penggera

To completely stop the alarm, move the alarm ON/OFF switch to the OFF position.

Penyelenggaraan

Pembersihan

Wipe the clock's casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

Penggantian Bateri

Replace the AA battery when the clock's display becomes dim, the backlight weakens, or the clock stops functioning. Follow the battery installation steps outlined in the Setup section.

Menyelesaikan masalah

  • Clock not displaying correct time: Ensure the battery is correctly installed and has sufficient power. Allow time for the radio wave signal to be received. Try moving the clock to a different location, preferably near a window.
  • Penggera tidak berbunyi: Check that the alarm ON/OFF switch is in the ON position. Verify that the alarm time is set correctly.
  • Lampu latar tidak berfungsi: Replace the battery if it is low. Ensure the top button is being pressed firmly.
  • No radio signal reception: Ensure the clock is not near sources of interference (e.g., TVs, computers, large metal objects). Try repositioning the clock.

Spesifikasi

  • Jenama: Seiko Clocks
  • Nombor Model: QHR201S
  • warna: Perak
  • Dimensi (L x W x H): 7.5 x 3.81 x 4.4 cm
  • Berat: 140 gram
  • Bahan: plastik
  • ciri-ciri: Backlight, Radio Wave Control
  • Sumber Kuasa: 1 x Bateri AA (termasuk)
  • Jenis Paparan: Analog
  • gaya: moden

Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk dokumentasi yang disediakan semasa pembelian atau hubungi peruncit anda. Simpan bukti pembelian anda untuk sebarang tuntutan jaminan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.