pengenalan
This manual provides essential instructions for the safe and proper installation, use, and maintenance of your EGLO 90266 Glass Lampshade. Please read these instructions carefully before proceeding with installation.
Maklumat Keselamatan
- Always disconnect power to the lighting fixture before installing or cleaning the lampteduh.
- Kendalikan komponen kaca dengan berhati-hati bagi mengelakkan kerosakan dan kecederaan.
- Pastikan lampshade is securely fastened to prevent it from falling.
- Do not use abrasive cleaners or materials that could scratch or damage the glass.
Persediaan dan Pemasangan
Follow these steps to install your EGLO 90266 Glass Lampteduh:
- Membongkar: Keluarkan l dengan berhati-hatiampshade from its packaging. Inspect for any damage. Dispose of packaging materials responsibly.
- Penyediaan: Ensure the power to the lighting fixture is turned off at the main switch.
- Pemasangan:
Penerangan Imej: A diagram illustrating the installation process. It shows a glass lampshade being placed over a lamp holder (step 1). A threaded retaining ring is then positioned (step 2) and screwed upwards (step 3) onto the lamp pemegang untuk mengamankan lampshade. The final step (step 4) indicates tightening the ring by hand.
- Langkah 1: Carefully slide the glass lampteduh di atas lamp holder of your fixture.
- Langkah 2: Take the provided retaining ring (threaded collar) and place it onto the lamp holder, below the lampteduh.
- Langkah 3: Screw the retaining ring upwards onto the lamp holder's threads until it firmly holds the lampteduh di tempatnya.
- Langkah 4: Hand-tighten the retaining ring to ensure the lampshade is secure but avoid over-tightening, which could damage the glass or threads.
Arahan Operasi
The EGLO 90266 Glass Lampshade is a passive component of your lighting fixture. Once installed, its function is to diffuse light and provide aesthetic appeal. No specific operational steps are required for the lampshade itself.
Penyelenggaraan dan Pembersihan
To maintain the appearance and longevity of your glass lampteduh:
- Pembersihan: Kerap mengelap lampshade with a soft, dry, lint-free cloth to remove dust.
- For more thorough cleaning, gently wipe with a damp cloth using only water or a mild glass cleaner. Immediately dry with a clean, soft cloth to prevent water spots.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the glass surface.
- Pastikan lampshade is completely dry before reconnecting power to the fixture.
Menyelesaikan masalah
Jika anda menghadapi sebarang masalah dengan l andaampshade, consider the following:
- Lampshade is loose: Ensure the retaining ring is securely hand-tightened onto the lamp holder. Do not over-tighten.
- Lampshade appears dirty or smudged: Rujuk bahagian "Penyelenggaraan dan Pembersihan" untuk prosedur pembersihan yang betul.
- Lampshade is damaged (cracked or broken): Gelas lampshade is not repairable. It must be replaced.
For issues related to the lighting fixture itself (e.g., light not turning on), consult the manual for your specific lighting fixture or contact a qualified electrician.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | EGLO |
| Nombor Model | 90266 |
| bahan | kaca |
| warna | putih |
| bentuk | Bulat |
| Dimensi (Diameter x Tinggi) | 9 cm x 9 cm |
| GTIN | 09002759902667 |
Maklumat Waranti
Specific warranty terms for the EGLO 90266 Glass Lampshade may vary by region and retailer. Please retain your proof of purchase and contact your point of sale or the manufacturer directly for detailed warranty information.
Sokongan Pelanggan
For further assistance, technical support, or to inquire about replacement parts, please contact your retailer or visit the official EGLO website. Have your model number (90266) and proof of purchase ready when contacting support.