Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter Instruction Manual

1. Pengenalan

The Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter allows you to wirelessly stream audio from any Bluetooth-enabled device to your speaker system. This manual provides instructions for setting up, operating, and maintaining your device.

Imej 1.1: Depan view daripada Amped Wireless BTSA1 adapter with its antenna.

Ciri-ciri Utama

• Wirelessly stream audio to your speaker system from any Bluetooth-enabled device.
• Experience superior sound quality without audio interruptions.
• Persediaan pasang dan main yang mudah.
• Compatible with any Bluetooth device and speakers with 3.5mm or RCA inputs.

2. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter
• Penyesuai Kuasa
• 3.5mm (male) to RCA (male) cable
• Panduan Pemasangan Pantas

3. Persediaan

Follow these steps to connect your Amped Wireless BTSA1 adapter to your speaker system and pair your device.

3.1 Menyambungkan Penyesuai

1. Sambungkan Kuasa: Plug the provided power adapter into the "PWR" port on the back of the BTSA1 adapter and then into a wall outlet.
2. Connect to Speaker System:
   • For RCA input: Use the included 3.5mm to RCA cable. Connect the RCA ends to the "AUDIO OUT" ports (red and white) on the back of the adapter and the 3.5mm end to your speaker system's auxiliary input.
   • For 3.5mm input: Use a standard 3.5mm audio cable (not included). Connect one end to the "LINE OUT" port on the back of the adapter and the other end to your speaker system's 3.5mm auxiliary input.

Image 3.1: Rear panel connections of the BTSA1 adapter, including power, audio outputs, and antenna port.

Imej 3.2: Sisi view illustrating the antenna connection and rear ports.

3.2 Memadankan Peranti Bluetooth

1. Ensure the BTSA1 adapter is powered on. The "Connect" button on the front will illuminate.
2. On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to its Bluetooth settings.
3. Dayakan Bluetooth dan cari peranti yang tersedia.
4. Pilih "Amped Wireless BTSA1" from the list of found devices.
5. Once connected, the indicator light on the adapter will change to confirm successful pairing.

Imej 3.3: Depan view of the BTSA1 adapter, highlighting the 'Connect' button.

4. Mengendalikan Penyesuai

After successful pairing, you can begin streaming audio.

1. Ensure your speaker system is turned on and set to the correct input source (AUX, RCA, etc.) where the BTSA1 is connected.
2. Play audio from your Bluetooth-enabled device. The sound will now be transmitted wirelessly to your speaker system.
3. Adjust volume using your Bluetooth device or your speaker system's controls.

Nota: Only one device can be actively connected to the BTSA1 adapter at a time. To connect a different device, disconnect the currently paired device from its Bluetooth settings, then initiate pairing from the new device.

5. Penyelenggaraan

The Amped Wireless BTSA1 adapter requires minimal maintenance.

• Simpan peranti ini di persekitaran yang kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Bersihkan bahagian luar dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
• Pastikan pengudaraan yang betul di sekeliling peranti untuk mengelakkan terlalu panas.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan anda Amped Wireless BTSA1 adapter, refer to the following common solutions:

7. Spesifikasi

8. Video Produk Tamatview

9. Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk kepada pegawai Amped Tanpa Wayar website or the contact details provided in the Quick Install Guide included with your product.