A&D Waterproof Interval Timer AD-5709TL User Manual

1. Pengenalan

Terima kasih kerana membeliasing the A&D Waterproof Interval Timer AD-5709TL. This versatile timer is designed for various applications, from kitchen use to sports training, offering precise timing and robust features. Its IPX7 waterproof rating ensures durability in wet environments, while its multi-timer and repeat functions provide flexibility for complex timing needs. Please read this manual carefully to ensure proper use and maintenance of your device.

Rajah 1.1: Depan view of the A&D Waterproof Interval Timer AD-5709TL, displaying its digital screen and control buttons.

2. Ciri-ciri Utama

• IPX7 Fully Waterproof: Designed to withstand splashes and submersion, ideal for kitchen and outdoor use.
• Fungsi Berbilang Pemasa: Capable of memorizing and running up to 8 individual timer settings sequentially.
• Fungsi Ulang: Set the timer to repeat from 1 to 999 times, or for an indefinite duration.
• Pemberitahuan Dwi Penggera: Alerts with both a red LED light (blinks for approx. 30 seconds) and a buzzer sound (5 or 30 seconds duration).
• Countdown & Count-up Modes: Functions as a countdown timer for set intervals and a count-up timer from zero.
• Fungsi Memori: Stores frequently used timer settings for quick recall.
• Sandaran magnetik: Equipped with a magnet for convenient attachment to metal surfaces.

Figure 2.1: The timer's magnetic backing allows for easy attachment to metal surfaces, as shown with paper clips.

Figure 2.2: The timer is shown submerged in water, highlighting its IPX7 waterproof rating for use in wet environments.

3. Persediaan

3.1. Kandungan Pakej

• A&D Waterproof Interval Timer AD-5709TL
• Manual Arahan
• CR2032 Lithium Battery (for monitor use)

3.2. Pemasangan Bateri

The timer uses one CR2032 lithium battery. A battery is included for initial monitoring purposes. For long-term use, it is recommended to replace it with a new battery.

1. Cari petak bateri di belakang pemasa.
2. Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
3. Masukkan bateri CR2032 dengan sisi positif (+) menghadap ke atas.
4. Pasang semula penutup bateri dan putar mengikut arah jam untuk memastikannya kukuh.

Rajah 3.1: Belakang view of the timer, illustrating the battery compartment and the CR2032 battery for installation.

3.3. Kuasa Awal Hidup

Once the battery is correctly installed, the timer will automatically power on and display '00:00'.

4. Operasi

4.1. Fungsi Butang

4.2. Setting a Countdown Timer

1. Ensure the timer display is '00:00'. If not, press the Berhenti butang untuk menetapkan semula.
2. Gunakan 1分, 10秒, dan 10分 buttons to set your desired countdown time. The maximum setting is 99 minutes 50 seconds, and the minimum is 10 seconds.
3. Tekan ke スタート/ポーズ butang untuk memulakan kira detik.
4. To pause the countdown, press スタート/ポーズ sekali lagi. Tekan sekali lagi untuk menyambung semula.
5. When the timer reaches zero, the alarm will sound (buzzer for 5 or 30 seconds) and the red LED will blink for approximately 30 seconds.
6. Tekan ke Berhenti button to silence the alarm and reset the timer to the last set time.

4.3. Using Multiple Timers (Sequential Operation)

The AD-5709TL can store and run up to 8 sequential timer settings. This is ideal for interval training or multi-step processes.

1. Set the first timer duration using the 1分, 10秒, dan 10分 butang.
2. Tekan ke メモリ button to save this setting as Step 1. The display will show '00:00' or the next step number.
3. Repeat the process to set and save up to 8 steps. Each time you press メモリ, it saves the current setting and moves to the next step number.
4. Once all steps are set, press スタート/ポーズ to begin the sequence. The timer will count down each step consecutively.
5. The alarm will sound after each step completes, and the timer will automatically proceed to the next step.

Gambar 4.1: Cthample of sequential timer operation with multiple steps and repeat functionality.

4.4. Fungsi Ulangan

After setting your sequential timers (or a single timer), you can set the number of times the sequence should repeat.

1. After setting your timer steps (as described in 4.3), press the メモリ button repeatedly until the display shows the repeat count setting (e.g., 'RPT 001').
2. Gunakan 1分, 10秒, dan 10分 buttons to adjust the repeat count from 1 to 999.
3. To set for permanent (infinite) repeat, continue pressing the buttons until 'RPT INF' or similar is displayed.
4. Tekan スタート/ポーズ to start the repeating timer sequence.

4.5. Count-up Function

To use the count-up function:

1. Ensure the timer display is '00:00'.
2. Tekan ke スタート/ポーズ button. The timer will immediately start counting up from 00 minutes 00 seconds.
3. Tekan スタート/ポーズ again to pause the count-up.
4. Tekan ke Berhenti button to stop the count-up and reset the display to '00:00'.

5. Penyelenggaraan

5.1. Pembersihan

Untuk membersihkan pemasa, lap dengan kain lembutamp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water beyond its IPX7 rating. Ensure the battery compartment is securely closed before cleaning with moisture.

5.2. Penggantian Bateri

When the display becomes dim or the timer functions erratically, it's time to replace the battery. Follow the steps in Section 3.2 for battery installation. Always use a new CR2032 lithium battery.

5.3. Penyimpanan

Store the timer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

6. Penyelesaian masalah

7. Spesifikasi

Figure 7.1: Visual representation of the timer's dimensions, weight, battery information, and alarm features.

8. Waranti dan Sokongan

This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or inquiries, please contact A&D customer service through their official website or the retailer from whom you purchased the product. Please retain your proof of purchase for warranty validation.

For more information, visit the official A&D webtapak: www.aandd.co.jp