Microlife 3AG1 Blood Pressure Monitor User Manual

1. Introduction and Important Safety Information

Thank you for choosing the Microlife 3AG1 Blood Pressure Monitor. This device is designed for accurate and reliable measurement of blood pressure and pulse rate at home. It utilizes the oscillometric measuring method and fuzzy logic technology for precise readings. Please read this manual thoroughly before using the device to ensure proper operation and to understand all safety precautions.

Nota Keselamatan Penting:

• Consult your doctor before using this device if you have any medical conditions.
• Jangan mendiagnosis sendiri atau mengubati sendiri berdasarkan ukuran tekanan darah. Sentiasa berunding dengan profesional penjagaan kesihatan.
• Jauhkan peranti daripada capaian kanak-kanak.
• Jangan gunakan peranti dalam kenderaan bergerak atau di dalam kapal terbang.
• Elakkan menggunakan peranti berhampiran medan elektromagnet yang kuat.

2. Produk Lebihview

The Microlife 3AG1 Blood Pressure Monitor consists of the main unit with a display and control buttons, and an arm cuff. Understanding these components is essential for correct usage.

Imej 1: The Microlife 3AG1 Blood Pressure Monitor, showing the main digital display unit and the attached arm cuff. This image illustrates the overall appearance of the device.

Unit Utama: Contains the digital display, START/STOP button, and memory buttons. It processes the measurements and displays the results.

Manset Lengan: Designed for upper arm placement, it inflates to measure blood pressure and pulse. The cuff is connected to the main unit via an air tube.

3. Persediaan

3.1 Pemasangan Bateri

The Microlife 3AG1 operates on batteries. Ensure fresh batteries are installed correctly before first use.

1. Buka penutup petak bateri di belakang unit utama.
2. Insert the required number of batteries (typically AA size, refer to the compartment for exact type and quantity) according to the polarity indicators (+ and -).
3. Tutup penutup petak bateri dengan selamat.
4. The battery check function will indicate battery status on the display. Replace batteries when the low battery indicator appears.

3.2 Cuff Attachment

Penempatan manset yang betul adalah penting untuk bacaan yang tepat.

1. Connect the air tube from the cuff securely into the air jack on the side of the main unit.
2. Place the cuff on your bare upper arm, approximately 2-3 cm above the elbow joint. The artery mark on the cuff should align with your brachial artery (inner side of the arm).
3. Ensure the cuff is snug but not too tight. You should be able to fit two fingers comfortably under the cuff.
4. The bottom edge of the cuff should be about 2 cm above the elbow.

4. Arahan Operasi

4.1 Mengambil Pengukuran

The Microlife 3AG1 features one-touch operation for ease of use.

1. Duduk dengan selesa dengan belakang anda disokong dan kaki rata di atas lantai. Letakkan lengan anda di atas meja supaya manset berada pada paras jantung.
2. Kekal diam dan tenang semasa pengukuran.
3. Tekan ke MULA/BERHENTI butang. Manset akan mengembang secara automatik.
4. The device will detect your pulse and measure your blood pressure using the oscillometric method with fuzzy logic.
5. Setelah pengukuran selesai, manset akan mengempis, dan tekanan sistolik, tekanan diastolik dan kadar nadi anda akan dipaparkan.
6. Tekan ke MULA/BERHENTI button again to turn off the device, or it will automatically switch off after approximately one minute of inactivity.

4.2 Fungsi Memori

The device stores previous measurements for tracking your blood pressure over time.

• To recall stored measurements, press the M (Memory) button when the device is off.
• Setiap akhbar daripada M button will cycle through the stored readings, displaying the most recent first.
• The number of stored readings may vary; refer to the display for the current memory index.

5. Penyelenggaraan dan Penjagaan

Penjagaan yang betul memastikan jangka hayat dan ketepatan monitor tekanan darah anda.

• Pembersihan: Clean the main unit and cuff with a soft, dry cloth. If necessary, use a cloth lightly dampdisapu dengan air atau detergen lembut. Jangan gunakan pembersih yang melelas atau rendam peranti di dalam air.
• Storan: Store the device in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Keep it in its original packaging or a protective case when not in use.
• Penggantian Bateri: Replace all batteries at the same time when the low battery indicator appears. Do not mix old and new batteries or different types of batteries.
• Penjagaan Manset: The cuff is a delicate component. Avoid bending or creasing the air tube excessively. Do not wash the cuff in a washing machine.

6. Penyelesaian masalah

If you encounter issues with your Microlife 3AG1, refer to the following common problems and solutions. The device also features an error code display for specific issues.

• Peranti tidak dihidupkan:
  • Periksa sama ada bateri dipasang dengan betul.
  • Replace with new batteries if they are depleted.
• Error Code (e.g., 'Err 1', 'Err 2'):
  • Ralat 1: Cuff not applied correctly or air leakage. Re-apply cuff and ensure tube is securely connected.
  • Ralat 2: Movement or talking during measurement. Remain still and silent during the process.
  • Ralat 3: Irregular pulse detected. Repeat measurement after a few minutes of rest. If it persists, consult a doctor.
  • Ralat 4: Cuff pressure too high or too low. Ensure cuff size is appropriate for your arm and applied correctly.
• Bacaan tidak tepat:
  • Ensure proper cuff placement and size.
  • Avoid caffeine, alcohol, or exercise 30 minutes before measurement.
  • Rest for 5 minutes before taking a measurement.
  • Ensure the arm is at heart level.

If problems persist after following these steps, please contact Microlife customer support.

7. Spesifikasi

8. Waranti dan Sokongan

The Microlife 3AG1 Blood Pressure Monitor comes with a Waranti pengilang selama 3 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

Waranti tidak meliputi:

• Damage caused by improper use or failure to follow instructions.
• Damage caused by accidents, abuse, or unauthorized alterations.
• Normal wear and tear of components, such as the cuff.

For warranty claims, technical support, or any questions regarding your device, please contact Microlife customer service. Refer to the contact information provided with your product packaging or visit the official Microlife webtapak untuk butiran sokongan serantau.