Casio TQ358-1
Casio TQ358-1D Bell Desktop Alarm Clock with Snooze User Manual
Model: TQ358-1
pengenalan
Terima kasih kerana membeliasing the Casio TQ358-1D Bell Desktop Alarm Clock with Snooze. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use and keep it for future reference.
Langkah Keselamatan Penting
- Jangan dedahkan jam kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
- Elakkan daripada menjatuhkan jam atau mendedahkannya kepada hentaman yang kuat.
- Jangan cuba membuka atau mengubah suai jam. Ini akan membatalkan jaminan.
- Jauhkan bateri daripada kanak-kanak. Jika tertelan, dapatkan rawatan perubatan segera.
- Buang bateri terpakai mengikut peraturan tempatan.
Kandungan Pakej
Please check to ensure all items are present in your package:
- Casio TQ358-1D Bell Desktop Alarm Clock
- Manual Pengguna (dokumen ini)
Nota: Bateri tidak disertakan dan mesti dibeli secara berasingan.
Produk Selesaiview
Biasakan diri anda dengan komponen jam loceng anda:

Imej: Depan view of the Casio TQ358-1D Bell Desktop Alarm Clock. It features a black analog dial with white numbers, two prominent bells on top, and a small light button. The clock has a classic twin-bell design.
- Time Set Knob: Located on the back, used to adjust the current time.
- Tombol Set Penggera: Located on the back, used to set the desired alarm time.
- Suis HIDUP/MATI penggera: Located on the back, slides to activate or deactivate the alarm.
- Butang Tunda/Cahaya: Located on top, press for temporary backlight and snooze function.
- Petak Bateri: Located on the back, holds the required batteries.
Persediaan
1. Pemasangan Bateri
- Buka penutup petak bateri yang terletak di belakang jam.
- Insert one (1) AA battery (not included) according to the polarity indicators (+ and -) inside the compartment.
- Tutup penutup petak bateri dengan selamat.
2. Menetapkan Masa Semasa
- Cari Time Set Knob di bahagian belakang jam.
- Rotate the knob in either direction until the hour and minute hands display the correct current time.
- Ensure you set the correct AM/PM if your clock has a 12-hour display with an AM/PM indicator (this model typically does not have a separate AM/PM indicator, but the alarm setting will differentiate).
3. Menetapkan Masa Penggera
- Cari Alarm Set Knob di bahagian belakang jam.
- Rotate the knob until the small alarm hand points to your desired wake-up time.
- Penting: For analog clocks, the alarm hand typically makes one full rotation in 12 hours. If you set the alarm for 7:00 AM, ensure the main time is also set to AM when you activate the alarm, or the alarm will sound at 7:00 PM.
Arahan Operasi
1. Mengaktifkan/Menyahaktifkan Penggera
- Kepada aktifkan the alarm, slide the Suis ON / OFF penggera (usually on the back or side) to the "ON" position. A small indicator (often red) may appear.
- Kepada nyahaktifkan the alarm, slide the Suis ON / OFF penggera ke kedudukan "MATI".
2. Fungsi Tunda
- Apabila penggera berbunyi, tekan besar Butang Tunda/Cahaya on the top of the clock.
- The alarm will temporarily stop and sound again after approximately 5-10 minutes (duration may vary by model).
- To completely stop the alarm, slide the Suis ON / OFF penggera ke kedudukan "MATI".
3. Fungsi Lampu Belakang
- To illuminate the clock face in low light conditions, press and hold the Butang Tunda/Cahaya di bahagian atas.
- The light will remain on as long as the button is pressed.
Penyelenggaraan
1. Cleaning the Clock
- Lap bahagian luar jam dengan kain lembut dan kering.
- Jangan gunakan pembersih, pelarut atau semburan kimia yang kasar, kerana ini boleh merosakkan kemasan.
- Avoid getting moisture into the clock's internal components.
2. Penggantian Bateri
- When the clock's display becomes dim or the alarm function weakens, it is time to replace the battery.
- Follow the "Battery Installation" steps in the Setup section to replace the old battery with a new AA battery.
- Buang bateri terpakai secara bertanggungjawab.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Clock not working / Display is blank. | Bateri mati atau tidak dipasang dengan betul. | Check battery polarity. Replace with a new AA battery. |
| Penggera tidak berbunyi. | Alarm is not activated. Alarm time is incorrectly set. Battery is low. | Ensure Alarm ON/OFF switch is in "ON" position. Verify alarm hand is set correctly for AM/PM. Replace battery. |
| Alarm sounds at the wrong time (e.g., PM instead of AM). | Alarm hand is set for the opposite 12-hour cycle. | Adjust the main time or alarm time by 12 hours to match the desired AM/PM cycle. |
| Backlight is dim or not working. | Bateri lemah. | Gantikan dengan bateri AA baharu. |
Spesifikasi
| Nombor Model | TQ358-1 |
| Jenama | Casio |
| Jenis Paparan | Analog |
| Sumber Kuasa | Battery Powered (1x AA battery, not included) |
| bahan | plastik |
| warna | Hitam |
| Dimensi (L x W x H) | 3.9 x 0.5 x 3 inci |
| Berat Barang | 5.3 auns |
| Ciri Khas | Alarm, Snooze, Built-in Light |
Waranti dan Sokongan
Casio products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Casio website. For technical support or inquiries, please contact Casio customer service through their official channels.
You can find more information and support at the official Casio webtapak: www.casio.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.