D-Link GO-SW-8G

D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Manual Pengguna

pengenalan

The D-Link GO-SW-8G is an 8-port unmanaged Gigabit desktop switch designed for small office and home office (SOHO) environments. This device facilitates network expansion by providing eight 10/100/1000 Mbps Ethernet ports, enabling high-speed data transfer for connected devices. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.

Persediaan

Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

  • GO-SW-8G device
  • Penyesuai Kuasa

Menyambung Suis

The GO-SW-8G is a plug-and-play device, requiring no software configuration for basic operation. Follow these steps to set up your switch:

  1. Sambungan Kuasa: Connect the provided power adapter to the power input port on the rear panel of the GO-SW-8G switch and then plug the adapter into a standard electrical outlet.
  2. Sambungan Peranti Rangkaian: Connect Ethernet cables from your network devices (e.g., computers, network-attached storage, routers) to any of the eight available RJ45 ports on the GO-SW-8G switch. The switch supports auto MDI/MDIX, so you can use either straight-through or crossover Ethernet cables.
  3. Pengesahan: Once connected, the corresponding LED indicator for each active port will illuminate, indicating a successful link.
D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Image: D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch. This image displays the compact white design of the switch with its multiple Ethernet ports and power input.

Beroperasi

The D-Link GO-SW-8G operates as an unmanaged switch, meaning it requires no user configuration for its core functions. It automatically detects network speed and duplex mode for each connected device, providing optimal performance. The Gigabit Ethernet ports support data transfer rates of up to 1000 Mbps, facilitating fast communication within your local network.

Penunjuk LED

The switch features LED indicators for each port and for power. These indicators provide visual feedback on the status of the switch and its connections:

  • LED kuasa: Bercahaya apabila suis dihidupkan.
  • LED Pautan/Aktiviti (setiap port):
    • Hijau Pepejal: Indicates a successful network link at Gigabit speed (1000 Mbps).
    • Amber pepejal: Indicates a successful network link at Fast Ethernet speed (10/100 Mbps).
    • Berkelip: Indicates network activity (data transmission or reception) on that port.
    • Mati: No link detected or device is not powered on/connected.

Penyelenggaraan

To ensure optimal performance and longevity of your D-Link GO-SW-8G switch, follow these general maintenance guidelines:

  • penempatan: Place the switch in a well-ventilated area to prevent overheating. Avoid direct sunlight and heat sources.
  • Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bahagian luar suis. Jangan gunakan cecair atau pembersih aerosol.
  • Pengurusan Kabel: Pastikan kabel rangkaian disusun dengan kemas dan tidak terlalu bengkok atau tegang.
  • Bekalan Kuasa: Gunakan hanya penyesuai kuasa yang dibekalkan bersama peranti.

Menyelesaikan masalah

If you encounter issues with your D-Link GO-SW-8G switch, refer to the following common troubleshooting steps:

  • Tiada Kuasa:
    • Pastikan penyesuai kuasa disambungkan dengan selamat pada suis dan soket elektrik yang berfungsi.
    • Periksa sama ada alur keluar kuasa berfungsi dengan memasang peranti lain.
  • Tiada Lampu Pautan:
    • Verify that the Ethernet cable is securely plugged into both the switch port and the network device.
    • Pastikan peranti rangkaian yang disambungkan dihidupkan dan berfungsi dengan betul.
    • Try a different Ethernet cable to rule out cable failure.
    • Uji dengan port berbeza pada suis.
  • Kelajuan Rangkaian Perlahan:
    • Confirm that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
    • Periksa trafik rangkaian yang berlebihan atau aplikasi intensif lebar jalur yang berjalan pada peranti yang bersambung.
    • Ensure the switch is placed in an area with adequate ventilation to prevent performance degradation due to overheating.

Spesifikasi

JenamaD-Link
Nombor ModelGO-SW-8G/B
Bilangan Pelabuhan8
Kadar Pemindahan Data1000 Megabytes Per Second (Gigabit)
Jenis SuisTidak terurus
Antara mukaRJ45
Peranti SerasiPC, Mac
Voltage5 Volt
Jenis Bahan Sarungplastik
Berat Barang0.3 paun

Maklumat Waranti

The D-Link GO-SW-8G switch comes with a Waranti terhad 3 tahun. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official D-Link webtapak.

Sokongan

For technical support, product registration, or to download the latest firmware and documentation, please visit the official D-Link support website. You can typically find support resources by searching for your product model (GO-SW-8G) on their site.

Rasmi D-Link Webtapak: www.dlink.com

© 2023 D-Link Corporation. Hak cipta terpelihara.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.