1. Pengenalan
The Detex EAX-500 Exit Alarm is a robust and reliable security device designed to provide audible alerts when an emergency exit door is opened. This manual provides essential information for the proper installation, operation, and maintenance of your EAX-500 unit to ensure optimal performance and security.
Image 1.1: The Detex EAX-500 Exit Alarm. This image displays the main unit, which is black, featuring a prominent red push bar for emergency exit. The unit is designed for surface mounting on a door.
2. Maklumat Keselamatan
Please read and understand all safety instructions before installing or operating the Detex EAX-500 Exit Alarm. Failure to follow these instructions may result in property damage or injury.
- Ensure the unit is installed by qualified personnel in accordance with local building codes and regulations.
- Sentiasa putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau perkhidmatan.
- Jangan dedahkan unit kepada suhu atau kelembapan yang melampau.
- Use only the specified 9V battery for power.
- Jauhkan bahan pembungkusan daripada kanak-kanak.
3. Kandungan Pakej
Selepas membuka pakej, sahkan bahawa semua komponen ada:
- Detex EAX-500 Exit Alarm Unit (Black)
- Perkakasan Pemasangan
- Manual Arahan
Note: The 9V battery and the On/Off mortise cylinder are sold separately and are required for full functionality.
4. Persediaan dan Pemasangan
Follow these steps for proper installation of the EAX-500 Exit Alarm:
- Sediakan Pintu: Identify the desired mounting location on the door. The unit is designed to mount directly on the door surface.
- Lekapkan Unit: Secure the EAX-500 unit to the door using the provided mounting hardware. Ensure it is level and firmly attached.
- Install the Mount Tab: Attach the mount tab to the door frame, aligning it with the unit on the door. This tab interacts with the alarm mechanism when the door is opened.
- Masukkan Bateri: Open the battery compartment (typically located on the side or back of the unit). Insert a fresh 9V battery, ensuring correct polarity. Close the compartment securely.
- Install Mortise Cylinder: If using the arm/disarm feature, install the separately purchased mortise cylinder into the designated slot on the unit. Refer to the cylinder manufacturer's instructions for specific installation details.
- Kefungsian Ujian: After installation, perform a functional test to ensure the alarm activates correctly when the door is opened and can be armed/disarmed with the mortise cylinder.
5. Operasi
The Detex EAX-500 Exit Alarm operates as follows:
- Mempersenjatai Penggera: Insert the key into the mortise cylinder and turn it to the 'Armed' position. The unit is now ready to detect unauthorized door openings.
- Melenyapkan Penggera: Insert the key into the mortise cylinder and turn it to the 'Disarmed' position. This will silence the alarm if it is sounding or prevent it from activating when the door is opened.
- Pengaktifan Penggera: When the door is opened while the alarm is armed, the mount tab on the door frame will disengage from the unit, triggering a loud audible alarm.
- Senyapkan Penggera: To silence an activated alarm, disarm the unit using the mortise cylinder key.
6. Penyelenggaraan
Regular maintenance ensures the longevity and reliability of your EAX-500 Exit Alarm.
- Penggantian Bateri: The EAX-500 operates on a 9V battery. Replace the battery annually or immediately if the low battery indicator (if present) activates, or if the alarm sound becomes weak. To replace, open the battery compartment, remove the old battery, insert a new 9V battery with correct polarity, and close the compartment.
- Pembersihan: Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components.
- Ujian Fungsian: Periodically test the alarm's functionality by arming and opening the door to ensure it sounds correctly. This helps confirm the battery and mechanism are in working order.
7. Penyelesaian masalah
Rujuk jadual berikut untuk isu biasa dan penyelesaiannya:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alarm does not sound when door opens. | Battery is dead or low. Unit is disarmed. Mount tab not engaging properly. | Replace 9V battery. Ensure unit is armed. Adjust mount tab alignment. |
| Penggera berbunyi secara berterusan. | Unit is armed and door is not fully closed, or mount tab is misaligned. | Ensure door is fully closed. Disarm the unit. Check and adjust mount tab alignment. |
| Key does not turn in mortise cylinder. | Incorrect key. Cylinder is jammed. | Ensure you are using the correct key for the installed mortise cylinder. Consult a locksmith if cylinder is jammed. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Detex |
| Nombor Model | EAX-500 |
| Sumber Kuasa | Bateri 9V (dijual berasingan) |
| Berat Barang | 5 paun |
| warna | Hitam |
| UPC | 033587104113 |
| Arm/Disarm Mechanism | Mortise Cylinder (sold separately) |
9. Maklumat Waranti
Specific warranty details for the Detex EAX-500 Exit Alarm are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official Detex webtapak.
10. Sokongan Pelanggan
If you require further assistance, technical support, or have questions not covered in this manual, please contact Detex customer service. Contact information can typically be found on the Detex official webtapak atau pada pembungkusan produk.