BIG RED T825013S1 Torin Hydraulic Trolley Floor Jack User Manual

pengenalan

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your BIG RED T825013S1 Torin Hydraulic Trolley Floor Jack. This 2.5-ton (5,000 lb) capacity floor jack is designed for lifting vehicles for service and maintenance. Please read and understand all instructions before use to ensure safety and proper function.

Image: The BIG RED T825013S1 Hydraulic Trolley Floor Jack, red in color, with its handle detached, resting on a white background.

Maklumat Keselamatan

WARNING: Read, understand, and follow all instructions before operating this device. Failure to observe these warnings may result in property damage, personal injury, or death.

• Always use this jack on a hard, level surface.
• Jangan melebihi kapasiti yang dinilai iaitu 2.5 tan (5,000 paun).
• This jack is a lifting device only. Immediately after lifting, support the vehicle with appropriate jack stands. Do not work under a vehicle supported only by a jack.
• Ensure the vehicle is in park (or gear) with the parking brake engaged and wheels chocked before lifting.
• Center the load on the saddle. Off-center loads can cause instability.
• Do not use the jack for purposes other than lifting vehicles.
• Jauhkan tangan dan kaki daripada bahagian yang bergerak.
• California Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Apa yang ada dalam Kotak

Your BIG RED T825013S1 Hydraulic Trolley Floor Jack package includes the following components:

• 1 x 2.5-ton trolley jack
• 1 x Jack handle (multi-piece for assembly)
• 1 x Plastic blow mold carrying storage case

Image: The BIG RED T825013S1 floor jack, its handle, and the blow mold carrying case, all neatly packed.

Persediaan

1. Membongkar: Remove all components from the carrying case.
2. Perhimpunan pemegang: Insert the lower handle section into the handle socket on the jack. Secure it if there's a locking mechanism (refer to specific diagrams if available). Then, attach the upper handle section to the lower section.
3. Mendarah Sistem Hidraulik:
   • Turn the release valve counter-clockwise to open it.
   • Pump the handle several times to remove any air from the hydraulic system.
   • Putar injap pelepas mengikut arah jam untuk menutupnya.
4. Operasi Ujian: Before first use, test the jack without a load. Pump the handle to raise the saddle to its maximum height, then slowly open the release valve to lower it. Ensure smooth operation.

Video: Official demonstration of the BIG RED T825013S1 Hydraulic Trolley Floor Jack in operation, showcasing its lifting capabilities.

Arahan Operasi

1. Sediakan Kenderaan: Letakkan kenderaan di permukaan yang keras dan rata. Tekan brek parkir dan letakkan penyekat roda pada roda yang akan kekal di atas tanah.
2. Letakkan Jack: Locate the vehicle manufacturer's recommended lifting points. Position the jack so the saddle is directly under the lifting point. Ensure the jack's wheels are free to move.
3. Angkat Kenderaan: Turn the release valve clockwise until it is firmly closed. Pump the jack handle to raise the vehicle to the desired height. Lift only high enough to place jack stands.
4. Selamat dengan Jack Stands: Immediately place appropriately rated jack stands under the vehicle's frame or designated support points. Ensure the jack stands are stable and locked.
5. Lower onto Jack Stands: Slowly turn the release valve counter-clockwise to lower the vehicle onto the jack stands. Once the vehicle is securely resting on the jack stands, remove the floor jack.
6. Lowering Completely: When ready to lower the vehicle completely, reposition the jack under the lifting point, raise the vehicle slightly to remove the jack stands, then slowly turn the release valve counter-clockwise to lower the vehicle to the ground.

Image: The BIG RED T825013S1 floor jack positioned under a vehicle's frame, with two red jack stands providing additional support.

Penyelenggaraan

• Pelinciran: Periodically lubricate moving parts with light grease or oil.
• Minyak hidraulik: Check the hydraulic oil level regularly. To do this, lower the jack completely, remove the oil filler plug, and ensure the oil level is just below the filler hole. Use only high-quality hydraulic jack oil.
• Pembersihan: Pastikan bicu bersih daripada kotoran, gris dan bahan menghakis.
• Storan: Store the jack in its carrying case in a dry, protected area when not in use. Ensure the jack is fully lowered before storage.
• Pemeriksaan: Before each use, inspect the jack for any damage, leaks, or loose parts. Do not use a damaged jack.

Menyelesaikan masalah

Spesifikasi

• Nombor Model: T825013S1
• Kapasiti Muatan: 2.5 Tan (5,000 paun)
• Ketinggian Pengangkatan Minimum: 5.5 inci
• Ketinggian Angkat Maksimum: 14.13 inci
• Bahan: Keluli Aloi
• Berat Barang: 31.3 paun
• Dimensi Item (LxWxH): 23.5 x 10.25 x 7 inci
• warna: merah
• Jenis Perkhidmatan Kenderaan: Car (Universal Fit)

Image: Diagram illustrating the minimum and maximum lifting heights of the BIG RED T825013S1 floor jack.

Waranti dan Sokongan

This BIG RED T825013S1 Hydraulic Trolley Floor Jack includes a limited 1-year manufacturer warranty. For warranty claims, technical support, or replacement parts, please contact Torin Inc. customer service. Keep your purchase receipt for warranty validation.

For further assistance, visit the official BIG RED store on Amazon: BIG RED Store.