1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Vortice Record Extractor Fan M10/4T 100mm with Timer. This unit is designed for intermittent or continuous ventilation in small to medium domestic or commercial premises, such as bathrooms, utility rooms, or kitchens. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Rajah 1: Depan view of the Vortice Record Extractor Fan M10/4T 100mm with Timer. This image displays the fan's white casing and central circular grille.
2. Maklumat Keselamatan
AMARAN: Untuk mengurangkan risiko kebakaran, renjatan elektrik atau kecederaan kepada orang, perhatikan perkara berikut:
- Installation must be carried out by a qualified electrician in accordance with all local and national wiring regulations.
- Always disconnect the power supply before performing any installation, maintenance, or cleaning.
- Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.
- Kanak-kanak harus diawasi untuk memastikan bahawa mereka tidak bermain dengan perkakas.
- Jangan gunakan kipas ini dengan peranti kawalan kelajuan keadaan pepejal.
- Ensure that the air discharge is not obstructed.
- The fan must not be installed in areas where the ambient temperature exceeds 40°C (104°F).
3. Kandungan Pakej
Carefully unpack the product and check for any damage. If any components are missing or damaged, contact your retailer immediately.
- Vortice Record Extractor Fan M10/4T unit
- Manual Arahan
- Perkakasan pemasangan (skru, palam dinding)
- Power cord (may not be included depending on regional regulations or specific model variant)
4. Spesifikasi
The following table outlines the key technical specifications for the Vortice Record Extractor Fan M10/4T 100mm with Timer.
| Ciri | Spesifikasi |
|---|---|
| Jenama | Pusaran |
| Nama Model | M10/4T (11630) |
| Reka Bentuk Kipas Elektrik | Kipas Ekzos |
| Sumber Kuasa | Kabel elektrik |
| Voltage | 240 Volt |
| Wattage | 16 Watt |
| Kapasiti Aliran Udara | 85 Cubic Meters Per Hour (approx. 50 CFM) |
| Tahap Kebisingan | 39 Desibel |
| Panjang Bilah | 100 Milimeter |
| Berat Barang | 0.43 Kilogram (lebih kurang 15.1 auns) |
| Dimensi Pakej | 18.4 L x 7.6 H x 13.0 W (centimeters) / 7.6 x 5.39 x 3.23 (inches) |
| Jenis Pemasangan | Lekap di dinding |
| Jenis Bilik | Bilik air |
| Ciri Khas | Fungsi Pemasa |
| Kaedah Kawalan | Touch (likely referring to external switch) |
| Jenis Selesai | metalik |
| Pensijilan | CE Diluluskan |
Rajah 2: Technical data and energy label for the Vortice Record Extractor Fan. Key data points include a maximum flow rate of 82 m³/h, total electrical power consumption of 14.3 W at maximum flow, and a sound power level (LWA) of 51 dB(A).
5. Pemasangan
Installation should only be performed by a qualified professional to ensure compliance with electrical safety standards and optimal performance.
5.1. Memilih Lokasi
Select a suitable wall-mount location, typically in a bathroom or utility area, ensuring adequate space for the fan and ducting. Avoid locations directly above heat sources or where the fan might be exposed to direct water spray.
Rajah 3: Example of a Vortice extractor fan installed on a wall in a room, demonstrating typical placement for ventilation.
5.2. Pemasangan dan Pendawaian
- Sediakan Pembukaan: Create an appropriate opening in the wall for the fan's ducting, typically 100mm in diameter. Refer to the dimensional drawing for precise measurements.
- Selamatkan Kipas: Mount the fan unit securely to the wall using the provided mounting hardware. Ensure it is level and stable.
- Sambungan Elektrik: Connect the fan to the main electrical supply. The M10/4T model includes a timer function, which requires specific wiring to a switched live and permanent live supply. Consult the wiring diagram provided with the product packaging or a qualified electrician for correct connection.
- Saluran: Connect appropriate ducting to the fan's outlet to direct extracted air outdoors. Ensure all connections are sealed to prevent air leakage.
Rajah 4: Technical drawing illustrating the dimensions of the Vortice Extractor Fan, including overall width (A), height (B), depth (C), and duct diameter (E, F).
6. Operasi
The Vortice Record Extractor Fan M10/4T is designed for simple operation, typically controlled via an external light switch or a dedicated fan switch.
6.1. Basic On/Off
When connected to a light switch, the fan will activate when the light is turned on. When connected to a dedicated fan switch, simply toggle the switch to turn the fan on or off.
6.2. Fungsi Pemasa
The M10/4T model features an adjustable timer. After the fan is switched off (e.g., by turning off the light), the fan will continue to operate for a preset duration before automatically shutting down. This duration can typically be adjusted using a small potentiometer located within the fan unit (access usually requires removing the front cover and disconnecting power). Experiment with the timer setting to achieve the desired run-on time for effective ventilation.
7. Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of your extractor fan. Always disconnect the power supply before any maintenance.
7.1. Membersihkan Bahagian Luar
Lap bahagian luar kipas dengan kain lembut,amp kain. Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
7.2. Cleaning the Fan Blades
Periodically, dust and debris may accumulate on the fan blades, reducing efficiency. To clean:
- Putuskan Kuasa: Ensure the fan's power supply is completely disconnected at the circuit breaker.
- Keluarkan Penutup: Carefully remove the front grille or cover of the fan.
- Bilah Bersih: Gently clean the fan blades and surrounding areas with a soft brush or a vacuum cleaner with a brush attachment. Avoid bending the blades.
- Pasang semula: Once clean, reattach the cover securely.
Rajah 5: Dalaman view of the Vortice Extractor Fan, showing the fan blades and motor housing, which may require periodic cleaning.
8. Penyelesaian masalah
If you encounter issues with your Vortice Extractor Fan, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kipas tidak dihidupkan | Tiada bekalan kuasa Pendawaian yang rosak Kesalahan dalaman | Check circuit breaker and wall switch. Ensure correct wiring (consult electrician). If problem persists, contact support. |
| Kipas terlalu bising | Pemasangan longgar Halangan pada bilah kipas Isu motor | Ensure fan is securely mounted. Disconnect power and check for obstructions. If noise persists, contact support. |
| Pengekstrakan udara yang tidak mencukupi | Saluran tersumbat Bilah kipas kotor Incorrect fan size for room | Check ducting for blockages. Clean fan blades as per maintenance section. Ensure fan is appropriately sized for the room volume. |
| Pemasa tidak berfungsi dengan betul | Tetapan pemasa yang salah Isu pendawaian | Adjust the timer potentiometer. Verify timer wiring with an electrician. |
For issues not listed here or if solutions do not resolve the problem, please contact qualified technical support.
9. Waranti dan Sokongan
9.1. Maklumat Waranti
Please refer to the warranty card or documentation included with your purchase for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
9.2. Sokongan Pelanggan
For technical assistance, spare parts, or service, please contact your retailer or visit the official Vortice webtapak untuk maklumat hubungan sokongan.