BONTEC TV Wall Bracket User Manual

1. Pengenalan

Thank you for choosing the BONTEC TV Wall Bracket. This full-motion wall mount is designed to securely hold 37-80 inch LED LCD flat and curved screen televisions, offering exceptional flexibility for optimal viewing angles. Manufactured from reinforced, compressed steel, it ensures durability and safety for your television. This manual provides essential information for safe installation, operation, and maintenance of your TV wall bracket.

2. Maklumat Keselamatan

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Kapasiti Berat: Jangan melebihi berat beban maksimum 65 kg (144 lbs).
• Jenis Dinding: This bracket is designed for installation on wood studs, concrete walls, or brick walls. DO NOT MOUNT ON DRYWALL ALONE without securing to a stud or using appropriate heavy-duty anchors for hollow walls.
• Pemasangan Profesional: Jika anda tidak pasti tentang proses pemasangan atau kesesuaian dinding anda, rujuk profesional yang berkelayakan.
• Check VESA Pattern: Ensure your TV's VESA pattern is compatible with the bracket before beginning installation.
• Pengikat Selamat: Ensure all screws and bolts are securely tightened before mounting the TV. Do not overtighten.
• Pengurusan Kabel: Route cables carefully to prevent pinching or damage when adjusting the TV.

3. Kandungan Pakej

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact BONTEC customer support.

Imej: Selesaiview of included fitting hardware and TV mounting screws.

• Pemasangan Pendakap Dinding TV
• Wall Anchors (M8*90mm Lag Bolts, M10*80mm Concrete Anchors)
• Assembly Hardware (M6*6mm, M6*10mm screws, M8 Washers, M8 Cushioned Nuts, M6 Plastic Washers, M6 Wrench)
• TV Mounting Screws (Various sizes: M4*12mm, M4*30mm, M6*20mm, M6*35mm, M8*20mm, M8*35mm, M8*50mm)
• Spacers (20mm M6/M8, 13mm M4, 5mm M6/M8)
• Washers (M4, M6, M8)
• Kabel HDMI 1.8m
• Tahap Semangat
• Arahan Bergambar

4. Spesifikasi

Image: TV size and VESA compatibility overview.

5. Persediaan dan Pemasangan

Follow these steps for a secure and efficient installation. It is recommended to have at least two people for installation, especially when mounting the TV.

5.1. Pemeriksaan Pra-Pemasangan

1. Sahkan Keserasian TV: Check your TV's VESA pattern and weight against the specifications.
2. Kenal pasti Jenis Dinding: Determine if your wall is wood stud, concrete, or brick. Use the appropriate anchors and drilling methods.
3. Locate Studs (for wood walls): Use a stud finder to accurately locate the center of wood studs.
4. Kawasan Jernih: Ensure the installation area is clear of obstructions, electrical wires, and plumbing.

Image: Diverse wall compatibility information.

5.2. Mounting the Wall Plate

1. Position the Template: Hold the wall plate or use the provided template against the wall at your desired height. Use the spirit level to ensure it is perfectly horizontal.
2. Tandai Lubang Gerudi: Tandakan titik penggerudian melalui lubang pada plat dinding.
3. Lubang gerudi: Drill pilot holes according to the marked points and the type of wall. For concrete/brick, use a masonry drill bit and insert concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
4. Pasang Plat Dinding: Secure the wall plate to the wall using the appropriate lag bolts and washers. Tighten firmly but do not overtighten.

5.3. Memasang Pendakap pada TV

1. Lay TV Face Down: Letakkan TV anda dengan berhati-hati menghadap ke bawah di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
2. Lampirkan Kurungan TV: Align the vertical TV brackets with the VESA mounting holes on the back of your TV. Use the correct size screws and spacers from the provided hardware kit. Ensure the brackets are securely fastened.

5.4. Hanging the TV and Final Adjustments

1. Gantung TV: With assistance, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the wall plate.
2. TV selamat: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall plate, preventing accidental dislodgement.
3. Laraskan Tahap: Use the ±3° rotation adjustment feature to fine-tune the TV's level if needed.

Image: Easy installation steps.

6. Pengendalian dan Pelarasan

The BONTEC TV Wall Bracket offers full motion capabilities for an optimized viewpengalaman dalam.

6.1. Swivel Adjustment

Gently push or pull the TV to swivel it up to 45° left or right. This allows you to direct the screen towards different viewing areas in your room.

Image: Swivel adjustment for optimal viewing.

6.2. Penyesuaian Tilt

To adjust the vertical tilt, gently push the top or bottom of the TV. The bracket allows for a tilt of +5° up and -15° down, helping to reduce glare and improve viewkeselesaan.

Image: Tilt and level adjustment features.

6.3. Extension and Retraction

The dual arms allow the TV to extend up to 360mm from the wall and retract to a low profile of 60mm, saving space when not in use.

6.4. Pengurusan Kabel

Utilize the integrated cable management system on the bracket arms to neatly route and conceal unsightly cables, maintaining a clean and tidy appearance.

7. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your TV wall bracket.

• Pembersihan: Wipe the bracket with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
• Pemeriksaan Berkala: Periodically check all mounting screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments may cause them to loosen slightly.
• Pelinciran: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult BONTEC customer support.

8. Penyelesaian masalah

If you encounter any issues with your BONTEC TV Wall Bracket, refer to the following common problems and solutions.

• TV tidak tahap: Use the ±3° rotation adjustment feature to fine-tune the level. Ensure the wall plate was installed horizontally using the spirit level.
• Bracket feels unstable or sags:
  1. Verify that the TV weight does not exceed the 65 kg (144 lbs) maximum capacity.
  2. Ensure all wall mounting bolts and TV attachment screws are securely tightened.
  3. Confirm that the bracket is mounted to appropriate wall studs or solid concrete/brick, not just drywall.
• Difficulty adjusting the TV (swivel/tilt/extension):
  1. Check for any obstructions preventing movement.
  2. Ensure no cables are caught in the moving parts.
  3. The joints are designed to be firm to hold the TV's position. Apply gentle, steady pressure.

If the problem persists after attempting these solutions, please contact BONTEC customer support for further assistance.

9. Waranti dan Sokongan

For information regarding warranty coverage, returns, or technical support, please refer to the documentation provided at the time of purchase or visit the official BONTEC webtapak. Simpan resit pembelian anda sebagai bukti pembelian.

BONTEC Customer Service: Please refer to the contact information provided on the product packaging or the official BONTEC webtapak untuk saluran sokongan yang paling terkini.