MEAN WELL HLG-240H-24B

Manual Arahan

MEAN WELL HLG-240H-24B Switching LED Power Supply

Model: HLG-240H-24B

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the MEAN WELL HLG-240H-24B Switching LED Power Supply. This unit is designed to provide a stable 24V output with a current range of 0-10A, delivering up to 240W of power. It is suitable for various LED lighting applications and other industrial uses requiring a reliable power source.

2. Maklumat Keselamatan

Please read all safety warnings and instructions carefully before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Bahaya Elektrik: Pemasangan dan pendawaian mesti dilakukan oleh juruelektrik yang berkelayakan mengikut semua kod elektrik tempatan dan kebangsaan.
  • Pemutusan Kuasa: Always disconnect power at the circuit breaker before performing any installation, wiring, or maintenance.
  • Pembumian yang betul: Ensure the power supply is properly grounded to prevent electric shock.
  • Pengudaraan: Do not obstruct ventilation openings. Adequate airflow is essential for proper operation and to prevent overheating.
  • Keadaan Persekitaran: This unit is rated IP67, suitable for dry, damp, and wet locations. However, avoid submerging the unit or exposing it to extreme temperatures outside its specified operating range.
  • Keserasian Muatan: Ensure the connected load does not exceed the power supply's maximum output capacity (240W, 10A).

3. Produk Lebihview

The HLG-240H-24B is a high-performance switching power supply designed for reliability and efficiency. It features a robust aluminum casing and sealed design for environmental protection.

Atas view of the Mean Well HLG-240H-24B power supply with wiring labels visible.

Rajah 3.1: Atas view of the HLG-240H-24B power supply, showing input and output wiring, model number, and various certifications. The input wires (brown, blue, green/yellow) and output wires (black, red, white) are clearly visible.

bersudut view of the Mean Well HLG-240H-24B power supply, showing the side with mounting tabs.

Rajah 3.2: Bersudut view of the power supply, highlighting the robust aluminum casing and the integrated mounting tabs on one end for secure installation.

sebelah view of the Mean Well HLG-240H-24B power supply, showing the sealed cable entries.

Rajah 3.3: Sisi view of the power supply, illustrating the sealed cable entries for both input and output wiring, contributing to its IP67 rating.

Bawah view of the Mean Well HLG-240H-24B power supply, showing the heat sink fins.

Rajah 3.4: Bawah view of the power supply, revealing the ribbed surface designed for efficient heat dissipation, ensuring stable operation.

4. Persediaan dan Pemasangan

Ikuti langkah ini untuk pemasangan yang selamat dan betul:

  1. Pemasangan: Select a suitable mounting location that allows for adequate ventilation and is protected from physical damage. Use the integrated mounting tabs to secure the unit firmly to a stable surface. Ensure the power supply is mounted horizontally or vertically with proper airflow.
  2. Input Wiring (AC):
    • Sambungkan coklat wire to the AC Line (L).
    • Sambungkan Biru wire to the AC Neutral (N).
    • Sambungkan Hijau/Kuning wire to Earth Ground (⏚).

    Note: Ensure all connections are secure and insulated. Refer to local electrical codes for proper wiring practices.

  3. Output Wiring (DC):
    • Sambungkan merah wire to the DC Positive (+V).
    • Sambungkan Hitam wire to the DC Negative (-V).
    • The putih wire is for dimming control (DIM+).
    • The Biru wire is for dimming control (DIM-).

    Note: Verify polarity before connecting to your LED load or other DC devices. Incorrect polarity can damage the power supply or the connected device.

  4. Dimming Function (Optional): If using the dimming function, connect the DIM+ and DIM- wires to a compatible 0-10V dimmer or PWM signal source. Refer to the dimmer's instructions for specific wiring.
  5. Hidupkan kuasa: After all connections are verified and secure, restore power to the circuit. The power supply should begin operating.

5. Arahan Operasi

Once installed, the HLG-240H-24B operates automatically. It provides a constant voltage output of 24V. The current output will vary depending on the connected load, up to a maximum of 10A.

  • Keluaran Voltage: The unit provides a regulated 24V DC output.
  • Arus Keluaran: The current delivered will be determined by the load, up to 10A. Do not exceed this limit.
  • Kawalan Peredupan: If connected to a compatible dimmer, the brightness of the connected LEDs can be adjusted via the 0-10V or PWM signal.
  • Ciri-ciri perlindungan: The power supply includes built-in protections against short circuit, over current, over voltage, and over temperature. In case of a fault, the unit may shut down automatically to protect itself and the connected load.

6. Penyelenggaraan

The HLG-240H-24B power supply is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance and longevity.

  • Pembersihan: Ensure the power supply's surface is kept clean and free of dust or debris, especially around the heat dissipation fins. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • Pengudaraan: Periodically check that the area around the power supply remains clear and that airflow is not obstructed.
  • Sambungan: Occasionally inspect wiring connections for any signs of loosening, corrosion, or damage. Ensure all connections remain secure.
  • Pemeriksaan Alam Sekitar: Sahkan bahawa persekitaran operasi kekal dalam julat suhu dan kelembapan yang ditetapkan.

Awas: Do not attempt to open or repair the power supply. There are no user-serviceable parts inside. Opening the unit will void the warranty and may expose you to dangerous voltages.

7. Penyelesaian masalah

If you experience issues with your HLG-240H-24B power supply, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Tiada keluaran voltage / Unit not powering on
  • Tiada kuasa input AC
  • Pendawaian yang salah
  • Lebihan beban atau perlindungan litar pintas diaktifkan
  • Kesalahan dalaman
  • Periksa pemutus litar dan sumber kuasa.
  • Verify input and output wiring connections.
  • Disconnect load, check for short circuits in wiring or load. Reduce load if overloaded. Cycle power.
  • If problem persists after checking above, unit may be faulty.
Keluaran voltage rendah atau tidak stabil
  • Keadaan beban berlebihan
  • Sambungannya lemah
  • Terlalu panas
  • Kurangkan beban bersambung.
  • Periksa semua sambungan pendawaian untuk kesesakan dan kakisan.
  • Ensure adequate ventilation and ambient temperature is within limits.
Fungsi peredupan tidak berfungsi
  • Incorrect dimming wiring
  • Dimmer tidak serasi
  • Dimmer faulty
  • Verify DIM+ and DIM- connections.
  • Ensure dimmer is compatible with 0-10V or PWM input.
  • Test dimmer with another compatible device if possible.

If troubleshooting steps do not resolve the issue, contact a qualified technician or the manufacturer for assistance. Do not attempt to repair the unit yourself.

8. Spesifikasi

ParameterNilai
Nombor ModelHLG-240H-24B
Input Voltage Julat100-240VAC (4.0A), 277VAC (1.5A for North America only)
Keluaran Voltage24V DC
Julat Arus Keluaran0-10A
Kuasa Dinilai240W
Kecekapan(Typically >90%)
Fungsi Peredupan0-10V / PWM / Resistance
Penarafan IPIP67 (Suitable for dry, damp, and wet locations)
Suhu Operasi-40°C to +80°C (Refer to derating curve in full datasheet)
Dimensi (L x W x H)9.45 x 2.76 x 1.57 inci (240 x 70 x 40 mm)
Berat badan2.5 paun (1.13 kg)
PensijilanUL, CUL, CE, SELV, IP67
Negara AsalChina

9. Waranti dan Sokongan

This MEAN WELL product is manufactured to high quality standards. Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the official MEAN WELL website. For technical support, product inquiries, or warranty claims, please contact your authorized MEAN WELL distributor or visit the official MEAN WELL webtapak untuk maklumat hubungan.

Untuk maklumat lanjut, sila layari: www.meanwell.com

© 2025 BERNIAT BAIK. Hak cipta terpelihara.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.