1. Pengenalan
Terima kasih kerana membeliasing the Byron BYR301 Wireless Door Chime Kit. This kit provides a convenient and reliable solution for your home or office, featuring a portable chime unit with an optional flashing light and a wireless push button. This manual contains important information regarding the installation, operation, and maintenance of your new door chime kit. Please read these instructions carefully before use and retain them for future reference.
2. Kandungan Pakej
Pastikan semua item ada dalam pakej:
- 1 x Portable Chime Unit
- 1 x Butang Tekan Tanpa Wayar
- 1 x CR2032 Battery (for Push Button)
- Mounting Hardware (screws, adhesive pad)
- Manual Pengguna
Figure 2.1: Package contents including the chime unit, push button, and packaging.
3. Maklumat Keselamatan
- Do not expose the chime unit or push button to extreme temperatures, direct sunlight, or moisture.
- Use only the specified battery types. Incorrect battery types may cause damage or explosion.
- Jauhkan bateri daripada kanak-kanak. Jika tertelan, dapatkan rawatan perubatan segera.
- Jangan cuba membuka atau membaiki peranti sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Dispose of old batteries and electronic devices responsibly, following local regulations.
4. Produk Lebihview
Familiarize yourself with the components of your Byron BYR301 Wireless Door Chime Kit.
Figure 4.1: Labeled diagram of the portable chime unit and wireless push button.
4.1. Portable Chime Unit Features
- High Quality Speaker: For clear sound output.
- 8 Melodi: Select from a variety of chime sounds.
- Kawalan Kelantangan: Adjust the chime volume (4 levels).
- Cahaya Berkelip: Visual alert for incoming visitors.
- Petak Bateri: Requires 3 x C batteries (not included).
4.2. Wireless Push Button Features
- Tekan butang: Activates the chime unit.
- Bateri: Dikuasakan oleh 1 x bateri CR2032 (termasuk).
- Tahan Cuaca: Sesuai untuk kegunaan luaran.
5. Persediaan
5.1. Installing Batteries in the Chime Unit
- Locate the battery compartment on the underside of the portable chime unit.
- Buka penutup petak bateri.
- Insert 3 x C batteries (LR14, not included) according to the polarity markings (+/-) inside the compartment.
- Tutup penutup petak bateri dengan selamat.
5.2. Installing Battery in the Push Button
- The CR2032 battery is typically pre-installed. If not, open the push button casing (usually by gently prying it open with a small screwdriver).
- Masukkan bateri CR2032 dengan sisi positif (+) menghadap ke atas.
- Tutup casing dengan selamat.
Figure 5.1: Wireless Push Button.
5.3. Memasang Butang Tekan
The push button is designed for outdoor use and can be mounted using screws or the provided adhesive pad.
- Choose a suitable location near your door, ensuring it is easily accessible to visitors.
- Menggunakan Skru: Mark the desired drilling points, drill pilot holes, and secure the push button base with the provided screws. Snap the front cover back on.
- Using Adhesive Pad: Clean the mounting surface thoroughly. Peel off the protective backing from the adhesive pad and firmly press the push button onto the surface for at least 30 seconds.
- Ensure the push button is mounted vertically for optimal performance.
Gambar 5.2: Cthample of push button installation.
5.4. Pairing (Automatic Learning)
The Byron BYR301 features automatic learning. Typically, the push button and chime unit are pre-paired at the factory. If they do not connect automatically, or if you are adding another push button, follow these steps:
- Ensure both the chime unit and push button have fresh batteries installed.
- Press and hold the pairing button (refer to the chime unit diagram for location, usually a small button or switch) on the chime unit until it emits a short sound or its indicator light flashes.
- Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
- Test the connection by pressing the push button. The chime unit should sound.
Figure 5.3: Wireless range illustration (up to 100m in open air).
6. Arahan Operasi
6.1. Menukar Melodi
The chime unit offers 8 different melodies. To change the melody:
- Locate the melody selection button on the chime unit (refer to Figure 4.1).
- Press this button repeatedly to cycle through the available melodies. The chime unit will play each melody as you select it.
- Stop pressing when you hear your desired melody.
6.2. Melaraskan Kelantangan
The chime unit has 4 volume levels. To adjust the volume:
- Locate the volume control button on the chime unit (refer to Figure 4.1).
- Press this button repeatedly to cycle through the volume levels (low, medium, high, extra loud).
- Stop pressing when you reach your desired volume level.
6.3. Using the Flashing Light
The chime unit features an optional flashing light for a visual alert.
- The flashing light activates automatically when the chime sounds.
- There is typically no separate control for the flashing light; it operates in conjunction with the chime.
7. Penyelenggaraan
7.1. Penggantian Bateri
- Unit Loceng: Replace the 3 x C batteries when the chime sound becomes weak or the unit stops functioning. Follow the steps in Section 5.1.
- Tekan butang: Replace the CR2032 battery when the chime unit no longer responds to the push button. Follow the steps in Section 5.2.
- Always use fresh, high-quality batteries of the specified type.
7.2. Pembersihan
- Lap unit loceng dan tekan butang dengan kain lembut dan kering.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surfaces.
- Ensure no moisture enters the units during cleaning.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Chime unit does not sound. | Bateri mati atau dipasang dengan salah pada unit loceng. Bateri mati atau dipasang dengan salah pada butang tekan. Chime unit and push button are not paired. Luar kawasan. |
Replace C batteries in chime unit, ensuring correct polarity. Replace CR2032 battery in push button, ensuring correct polarity. Perform pairing procedure (Section 5.4). Alihkan unit loceng lebih dekat dengan butang tekan. |
| Chime sounds intermittently. | Bateri lemah. Gangguan daripada peranti wayarles lain. Halangan antara unit. |
Gantikan bateri di kedua-dua unit. Relocate chime unit or push button away from potential interference sources. Ensure clear line of sight or fewer obstructions between units. |
| Flashing light does not work. | Chime unit batteries are low or dead. | Replace C batteries in the chime unit. |
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | OLEH301 |
| Pengeluar | Byron |
| Kuasa Unit Loceng | 3 x C (LR14) batteries (not included) |
| Kuasa Tekan Butang | 1 x bateri CR2032 (termasuk) |
| Julat Tanpa Wayar | Sehingga 100 meter (udara terbuka) |
| melodi | 8 |
| Tahap Kelantangan | 4 (including extra loud) |
| Makluman Visual | Optional Flashing Light |
| Dimensi (Unit Loceng) | Lebih kurang 6 x 20 x 24 cm |
| Berat badan | 240 grams (total kit) |
| bahan | Plastik casing |
| Pensijilan | CE |
| Usage (Push Button) | Luar |
10. Waranti dan Sokongan
For detailed warranty information, please refer to the documentation included with your purchase or visit the official Byron website. If you encounter any issues not covered in the troubleshooting section, please contact Byron customer support for assistance.
- Sokongan dalam talian: www.byron.com/support (cthamppautan, sila sahkan rasmi webtapak)
- e-mel: support@byron.com (cthample email, please verify official contact)