Denon AVR-1312 AV Surround Receiver

pengenalan

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Denon AVR-1312 5.1-channel AV Surround Receiver. The AVR-1312 is designed to deliver a powerful surround sound experience, supporting 3D video when connected to compatible equipment. It features Compressed Audio Restorer technology for enhanced sound from portable audio players and Quick Select buttons for easy source and surround mode selection.

Persediaan Awal

1. Membongkar

Carefully remove the receiver from its packaging. Ensure all accessories, such as the remote control, batteries, and FM/AM antennas, are present. Retain the packaging for future transport or storage.

2. penempatan

Place the receiver on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight. Ensure there is sufficient space around the unit for proper airflow to prevent overheating.

3. Sambungan

Sebelum membuat sebarang sambungan, pastikan penerima dan semua peranti yang disambungkan telah dimatikan dan dicabut daripada soket dinding.

Figure 1: Rear panel connections of the Denon AVR-1312. This view displays HDMI inputs and output, analog audio inputs, digital audio inputs (optical and coaxial), video inputs, and speaker terminals.

Sambungan HDMI:

• Connect your video sources (e.g., Blu-ray player, game console, cable box) to the HDMI DALAM ports (HDMI 1-4).
• Connect your TV or projector to the HDMI KELUAR MONITOR port. This single cable will carry both video and audio signals to your display.

Sambungan Audio:

• Digital Audio Inputs (OPTICAL/COAXIAL): For devices with digital audio outputs (e.g., CD player, older game consoles).
• Analog Audio Inputs (AUDIO IN): For devices with analog stereo outputs (e.g., CD player, tape deck).
• Stereo Mini Jack (FRONT PANEL): For connecting portable audio players.

Video Connections (Legacy):

• Component Video (DVD, GAME, SAT/CBL): For devices using component video cables (red, green, blue).
• Composite Video (DVD, GAME, SAT/CBL, VCR): For devices using composite video cables (yellow).

Sambungan Pembesar Suara:

• Connect your speakers to the corresponding terminals on the rear panel: L/R HADAPAN, PUSAT, SURROUND L/R.
• Ensure correct polarity (+ to + and - to -) for all speakers.
• For the subwoofer, connect a single RCA cable from the SUBWOOFER PRE OUT to the subwoofer's LFE input.
• The receiver supports 6-8 ohm speakers.

Sambungan Antena:

• Connect the supplied FM indoor antenna to the ANTENNA FM terminal.
• Connect the supplied AM loop antenna to the AM ANTENA terminal.

Operasi Asas

1. Hidupkan/Mati Kuasa

Tekan ke KUASA butang pada panel hadapan atau BERSIAP SEDIA butang pada alat kawalan jauh untuk menghidupkan atau mematikan penerima.

2. Pemilihan Input

Select the desired input source using the input selector buttons on the front panel (e.g., DVD, GAME, SAT/CBL) or the corresponding buttons on the remote control.

Figure 2: Front panel Quick Select and Dock Control buttons. These buttons allow for quick access to frequently used sources and sound modes.

Butang Pilih Pantas:

The AVR-1312 features four PILIH CEPAT buttons on the front panel and remote control. These buttons allow you to instantly switch to a pre-registered input source and surround mode. To register a setting, select the desired input and surround mode, then press and hold one of the Quick Select buttons (1-4) for a few seconds until the display flashes.

3. Kawalan Kelantangan

Laraskan kelantangan induk menggunakan besar JILID tombol pada panel hadapan atau pada JILID +/- butang pada alat kawalan jauh.

4. Mod Bunyi

Tekan ke MODE or SEKITAR buttons on the remote control to cycle through available sound modes (e.g., Stereo, Dolby Digital, DTS, Multi-Channel Stereo). The receiver automatically detects the incoming audio signal and suggests optimal modes.

Figure 3: Denon RC-1158 Remote Control. This remote provides full control over the receiver's functions, including power, input selection, volume, sound modes, and menu navigation.

Penjagaan dan Penyelenggaraan

• Pembersihan: Wipe the exterior of the receiver with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical cloths, as these may damage the finish.
• Pengudaraan: Ensure that the ventilation openings on the top and sides of the receiver are not blocked. Proper airflow is essential to prevent internal heat buildup.
• Kord Kuasa: When unplugging the power cord, always grasp the plug, not the cord itself.
• Penyimpanan: If storing the unit for an extended period, disconnect the power cord and store it in a clean, dry place.

Panduan Penyelesaian Masalah

If you encounter issues with your receiver, refer to the following common problems and solutions before contacting customer support.

Spesifikasi Teknikal

Maklumat Waranti

The Denon AVR-1312 AV Surround Receiver comes with a Waranti 2 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the warranty card included with your product or visit the official Denon webtapak.

Sokongan Pelanggan

Untuk bantuan lanjut, sokongan teknikal atau pertanyaan perkhidmatan, sila lawati laman web rasmi Denon website or contact their customer service department. You can typically find contact information, FAQs, and additional resources on the manufacturer's support pages.