1. Pengenalan
This manual provides instructions for the installation, operation, and maintenance of your Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This controller is designed to manage residential 24-volt sprinkler systems, offering dual programming capabilities and a rain delay feature.
Image 1.1: The Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This image displays the front panel of the controller, featuring its digital display and control buttons.
2. Maklumat Keselamatan
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or personal injury.
- This controller is designed for indoor use only. Do not install outdoors or in areas exposed to water.
- Pastikan bekalan kuasa diputuskan sebelum melakukan sebarang pendawaian atau penyelenggaraan.
- All electrical wiring should comply with local codes and regulations. If you are unsure, consult a qualified electrician.
- Jangan cuba membaiki unit sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
3. Persediaan
3.1 Membongkar
Carefully remove the controller from its packaging. Verify that all components are present. Retain packaging for future use or disposal.
3.2 Memasang Pengawal
- Choose a suitable indoor location near a standard 120V AC outlet and away from direct sunlight or extreme temperatures.
- Use the provided mounting template (if applicable) or mark the desired screw locations on the wall.
- Install mounting screws into the wall, leaving the screw heads slightly extended.
- Hang the controller onto the screws using the keyhole slots on the back of the unit.
- Secure the controller by tightening the screws.
3.3 Pendawaian
Penting: Putuskan kuasa sebelum pendawaian.
- Sambungan Kuasa: Plug the controller's power cord into a standard 120V AC outlet.
- Pendawaian Injap: Connect one wire from each sprinkler valve to a numbered terminal (1, 2, 3, 4) on the controller. Connect the common wire from all valves to the terminal labeled 'C' (Common).
- Pendawaian Sensor (Pilihan): If using a rain sensor, connect its wires to the designated sensor terminals. Refer to your sensor's manual for specific wiring instructions.
3.4 Kuasa Permulaan
Once all wiring is complete and secure, connect the power cord to the electrical outlet. The controller display should illuminate, indicating it is powered on.
4. Arahan Operasi
4.1 Memahami Paparan dan Butang
The controller features a digital display and several buttons for navigation and programming. Familiarize yourself with the 'Program', 'Set', 'Arrow' (up/down), and 'Rain Delay' buttons.
4.2 Menetapkan Masa dan Tarikh Semasa
- Press the 'Set' button repeatedly until 'Set Time' appears on the display.
- Use the 'Arrow' buttons to adjust the hour, then press 'Set' to move to minutes.
- Repeat for minutes, AM/PM, year, month, and day.
4.3 Pengaturcaraan Jadual Penyiraman
The controller supports dual programs (A and B) for flexible scheduling.
- Pilih Program: Press the 'Program' button to select Program A or B.
- Tetapkan Masa Mula: Press 'Set' until 'Start Time' appears. Use 'Arrow' buttons to set the desired start time for the first cycle. The controller supports multiple start times per program.
- Tetapkan Masa Larian: Press 'Set' until 'Run Time' appears. Use 'Arrow' buttons to set the duration (in minutes) for each station (1-4).
- Tetapkan Hari Penyiraman: Press 'Set' until 'Watering Days' appears. Use 'Arrow' buttons to select specific days of the week, odd/even days, or interval watering.
4.4 Operasi Manual
To manually water a station or all stations:
- Press the 'Manual' button (if available, or follow specific manual run instructions in the display menu).
- Select the desired station or 'All Stations'.
- Set the run time using the 'Arrow' buttons.
- The selected station(s) will begin watering immediately.
4.5 Fungsi Kelewatan Hujan
The rain delay feature allows you to pause watering for a set period without losing your programmed schedule.
- Press the 'Rain Delay' button.
- Use the 'Arrow' buttons to select the delay duration (e.g., 24, 48, or 72 hours).
- The controller will pause watering for the selected period and resume the schedule automatically afterward.
5. Penyelenggaraan
5.1 Pembersihan
Wipe the controller's exterior with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan paparan atauasing.
5.2 Pertimbangan Bermusim
As an indoor controller, the unit is not directly exposed to outdoor elements. However, ensure the indoor environment remains within recommended operating temperatures to prolong its lifespan.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan pengawal kosong. | Tiada kuasa. | Check power outlet, ensure power cord is securely plugged in. Verify circuit breaker. |
| Pemercik tidak menyala. | Incorrect programming, wiring issue, or rain sensor activated. | Verify watering schedule. Check valve wiring connections. Ensure rain sensor is not active or bypassed. |
| Only some sprinklers turn on. | Faulty valve, wiring issue to specific station. | Check wiring for the non-working station. Test the valve manually. |
| Penyiraman berlaku pada masa yang salah. | Incorrect time/date setting or program schedule. | Sahkan masa dan tarikh semasa.view and adjust program start times and watering days. |
7. Spesifikasi
- model: Orbit 27954 Pocket Star 4-Station Plus Indoor Controller
- Jenama: Orbit
- Nombor Bahagian: 27954
- Bilangan Stesen: 4
- Voltage: 24 Volt (AC)
- Input Antara Muka Manusia: Butang
- Bateri Diperlukan: Tidak
- Pemasangan: Dalaman
- ciri-ciri: Dual program, Rain delay
- Dimensi Pakej: 21.84 x 13.46 x 6.6 cm
- Berat: 226.8 g
8. Waranti dan Sokongan
For warranty information or technical support, please refer to the official Orbit webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian.