Winco Analog Receiving Scale SCAL-820 Instruction Manual

Persediaan

1. Membongkar: Carefully remove the scale from its packaging. Inspect for any shipping damage.
2. penempatan: Place the scale on a stable, flat, and level surface to ensure accurate readings. Avoid placing it near vibrations or drafts.
3. Keluarkan Pembungkusan Perlindungan: Locate and remove any internal corrugated cylinders or protective materials that may be securing the weighing mechanism during transit. These are typically found beneath the weighing platform.
4. Sifar Skala: Before first use and periodically thereafter, ensure the scale reads zero when nothing is on the platform. If the needle is not at zero, gently turn the calibration knob, usually located at the bottom front or side of the dial, until the needle aligns with the '0' mark.

Imej: A terperinci view of the scale's weighing platform attachment, highlighting the robust construction and connection points. This area should be checked for any protective packaging during initial setup.

Arahan Operasi

1. Prepare for Weighing: Ensure the scale is on a stable surface and the dial is set to zero. Adjust the zeroing knob if necessary.
2. Item Tempat: Gently place the item to be weighed onto the center of the stainless steel platform.
3. Baca Pengukuran: Observe the red needle on the dial. The outer ring indicates weight in pounds (lbs), and the inner ring indicates weight in kilograms (kg). The scale features graduations of 1 ounce (50g) for precise readings.
4. Alih Keluar Item: Once the weight is recorded, carefully remove the item from the platform.
5. Tare Function (Manual): To weigh multiple ingredients in the same container, place the empty container on the platform, then turn the zeroing knob to reset the needle to zero. Add the first ingredient, record its weight, then reset to zero again before adding the next ingredient.

Image: A close-up of the scale's analog dial, clearly showing the measurement markings for pounds (outer ring) and kilograms (inner ring), along with the red indicator needle. The Winco logo is visible at the bottom of the dial.

Penyelenggaraan

• Pembersihan: The stainless steel platform can be removed and is dishwasher safe for easy cleaning. The main body of the scale should be wiped clean with a damp cloth and mild detergent. Avoid submerging the entire scale in water.
• Storan: Store the scale in a dry, clean environment.
• Pemeriksaan: Periodically check the scale for any signs of wear or damage. Ensure the platform is securely attached and the dial moves freely.

Menyelesaikan masalah

Spesifikasi

• Jenama: Winco
• model: SCAL-820
• Jenis Paparan: Analog
• Had Berat: 20 Paun (9 Kilogram)
• Ketepatan Bacaan: 1 auns (50g)
• Bahan: Keluli Tahan Karat
• warna: White, Steel
• Ciri Khas: Dishwasher Safe (Platform)
• Berat Barang: 6.3 paun
• Komponen yang Disertakan: Skala
• UPC: 842169122533

Waranti dan Sokongan

For warranty information or technical support regarding your Winco Analog Receiving Scale SCAL-820, please refer to the documentation included with your purchase or visit the official Winco website. You may also contact Winco customer service directly for assistance with product inquiries, parts, or service.

Pengeluar: Winco Amerika Syarikat

Hubungi: Sila layari wincous.com untuk butiran hubungan dan sumber sokongan.