M MARANTEC M3-2314

M MARANTEC M3-2314 Digital 384 4-Channel 315MHz Remote Transmitter User Manual

Model: M3-2314

1. Produk Lebihview

The M MARANTEC M3-2314 Digital 384 4-Channel 315MHz Remote Transmitter is designed to operate compatible Marantec garage door openers. This remote provides convenient access to your garage door system with its multi-channel capability.

It is engineered for reliable performance and ease of use, serving as a replacement or additional remote for your Marantec garage door opener.

2. Keserasian

This remote transmitter is compatible with the following Marantec garage door opener systems:

  • All Marantec 315 MHz garage door openers with a serial number starting with 31 or higher, or manufactured from 2004 to current.
  • Garage door opener models: M-4500, M-4700, Q-7500, Q-7700, Q-7900, M-Line, Q-Line.
  • Older remote models: ML-1312V, ML-1314, ML-2314, ML-3313.

Penting: To verify compatibility, locate the serial number on your main garage door opener power head. If your serial number starts with 30 or less, contact Marantec support for assistance in matching the correct replacement remote.

3. Kandungan Pakej

Your M3-2314 remote transmitter package includes:

  • Marantec M3-2314 Remote Transmitter
  • Visor Clip or Keyring attachment
  • Bateri (dipasang terlebih dahulu atau disertakan secara berasingan)
  • Kabel pengaturcaraan
  • Programming Instructions (detailed steps for your specific opener model)

4. Persediaan dan Pengaturcaraan

To program your M3-2314 remote transmitter to your garage door opener, follow these general steps. Always refer to the specific programming instructions included with your remote and your garage door opener's user manual for detailed, model-specific procedures.

4.1. Remote Overview

Depan view of the Marantec M3-2314 remote transmitter, showing four hexagonal buttons arranged in a cross pattern and a small LED indicator at the top.

Rajah 1: Depan view of the M3-2314 remote, displaying the four programmable buttons and LED indicator.

4.2. Programming Steps (General Guide)

  1. Prepare the Opener: Locate the programming button or terminals on your Marantec garage door opener's power head. This is typically labeled 'Program', 'P', or similar.
  2. Connect Programming Cable: If your opener model requires it, connect the provided programming cable between the remote and the designated port on your garage door opener.
  3. Aktifkan Mod Pengaturcaraan: Press and hold the programming button on your garage door opener until the indicator light (often red or green) illuminates or flashes, indicating it is in programming mode. Release the button.
  4. Program Remote Button: Within 30 seconds of activating programming mode on the opener, press the desired button on your M3-2314 remote transmitter that you wish to program. The opener's indicator light may change or flash to confirm successful programming.
  5. Operasi Ujian: After programming, disconnect the cable (if used) and wait a few seconds. Press the programmed button on your remote to test if the garage door operates correctly.
  6. Program Additional Buttons: Repeat the process for any other buttons on the remote you wish to program for additional garage doors or functions.

If you encounter difficulties, consult the detailed programming instructions that came with your remote or your garage door opener's manual. Marantec's official website may also provide support resources.

5. Mengendalikan Alat Jauh

Once programmed, operating your M3-2314 remote is straightforward:

  • Buka/Tutup Pintu: Press the programmed button once to open or close your garage door.
  • Pintu Berhenti: Press the programmed button again while the door is in motion to stop it.
  • Pelbagai Pintu: If you have programmed multiple buttons for different garage doors, press the corresponding button for the desired door.
  • Penunjuk LED: The small LED light on the remote will illuminate when a button is pressed, indicating that a signal is being transmitted.

6. Penyelenggaraan

6.1. Penggantian Bateri

The remote transmitter is powered by a coin cell battery, typically a CR2032. When the remote's range decreases significantly or the LED indicator light becomes dim or fails to illuminate, it's time to replace the battery.

belakang view of the Marantec M3-2314 remote transmitter, showing the battery compartment cover at the bottom.

Rajah 2: Belakang view of the M3-2314 remote, showing the battery compartment.

  1. Cari Petak Bateri: Turn the remote over to its back. The battery compartment is usually a small cover that can be slid or unclipped.
  2. Petak Terbuka: Use a small coin or screwdriver to gently pry open the battery compartment cover.
  3. Keluarkan Bateri Lama: Carefully remove the old CR2032 battery. Note its orientation.
  4. Masukkan Bateri Baharu: Insert a new CR2032 battery with the positive (+) side facing up (or as indicated inside the compartment).
  5. Tutup Petak: Gantikan penutup petak bateri, pastikan ia terpasang dengan selamat pada tempatnya.

Buang bateri lama secara bertanggungjawab mengikut peraturan tempatan.

7. Penyelesaian masalah

Masalah Kemungkinan Punca Penyelesaian
Remote does not operate the garage door.
  • Remote not programmed correctly.
  • Bateri mati atau lemah.
  • Jauh di luar julat.
  • Opener's antenna obstructed or damaged.
  • Programkan semula alat kawalan jauh mengikut Bahagian 4.
  • Replace the battery (Section 6.1).
  • Bergerak lebih dekat ke pembuka pintu garaj.
  • Check the opener's antenna for obstructions or damage.
Alat jauh berfungsi secara berselang-seli.
  • Bateri lemah
  • Gangguan daripada peranti lain.
  • Replace the battery (Section 6.1).
  • Identify and remove sources of interference (e.g., LED lights, other wireless devices).
LED on remote does not light up.
  • Bateri mati.
  • Faulty remote.
  • Replace the battery (Section 6.1).
  • If battery replacement does not resolve the issue, the remote may be faulty and require replacement.

8. Spesifikasi

Ciri Perincian
Nombor Model M3-2314
Kekerapan 315 MHz
Saluran 4-Saluran
Berat Barang 1.44 auns (lebih kurang 40.8 gram)
Dimensi Pakej 3.23 x 2.72 x 0.79 inci (lebih kurang 8.2 x 6.9 x 2.0 cm)
Jenis Bateri CR2032 Coin Cell (estimated)

9. Waranti dan Sokongan

For warranty information, technical support, or further assistance with your M MARANTEC M3-2314 remote transmitter, please refer to the documentation included with your product or visit the official M MARANTEC weblaman web. Maklumat hubungan untuk khidmat pelanggan biasanya tersedia di laman web pengilang webtapak.

Always ensure you are using genuine Marantec parts and accessories for optimal performance and safety.

© 2023 M MARANTEC. All rights reserved. Information subject to change without notice.