Finnex Aquarium Digital Heater Controller

pengenalan

The Finnex HC-810M Digital Heater Controller is designed to provide precise temperature control for your aquarium, ensuring a stable environment for your aquatic livestock. This controller features a digital LED display for easy monitoring and adjustable high/low temperature settings with an audio alert for enhanced safety. Its dual-relay inter-work system offers double protection against overheating, automatically disabling heating if temperatures exceed safe limits. The controller is compatible with various heating elements up to 800 Watts, including Finnex Titanium Tubes, and retains preset settings even after power interruptions.

Maklumat Keselamatan

• This device is intended for indoor aquarium use only.
• Ensure the controller and all connected heating elements are unplugged before performing any maintenance or handling.
• Do not immerse the controller unit in water. The temperature probe is submersible, but the main unit is not.
• Pastikan jumlah wattage of all connected heating elements does not exceed 800 Watts.
• Keep the controller away from direct sunlight, excessive heat, or moisture.
• Always use a drip loop for all power cords to prevent water from traveling along the cord and reaching the electrical outlet.
• Jika unit menunjukkan tanda-tanda kerosakan atau pincang tugas, hentikan penggunaan dengan segera dan hubungi khidmat pelanggan.

Kandungan Pakej

• Finnex HC-810M Digital Heater Controller Unit
• Siasatan Suhu
• Manual Pengguna (dokumen ini)

Persediaan

1. penempatan: Position the Finnex HC-810M controller in a dry, well-ventilated area, away from direct water splashes.
2. Sambungkan Pemanas: Plug your aquarium heating element(s) into the three-prong power receptacle(s) on the controller. Ensure the total wattage does not exceed 800 Watts. Note: Heating elements are sold separately.
3. Siasatan Suhu Kedudukan: Carefully place the temperature probe into your aquarium. For accurate readings, position the probe away from direct water flow from the heater and in an area that reflects the average tank temperature. Use the included suction cup to secure the probe to the aquarium glass.
4. Hidupkan kuasa: Plug the controller's power cord into a standard 120V electrical outlet. The LED display will illuminate, showing the current water temperature.

Image: The Finnex HC-810M controller showing its main unit, power cords, and the temperature probe.

Arahan Operasi

1. Suhu bacaan: The large LED display shows the current water temperature.
2. Menetapkan Suhu yang Diingini:
   • Tekan ke ON/OFF/SET button once. The display will flash the current set temperature.
   • Gunakan + dan - butang untuk melaraskan suhu yang dikehendaki.
   • Tekan ON/OFF/SET again to confirm and save the setting. The display will return to showing the current water temperature.
3. Setting High/Low Temperature Alerts: The controller features an audio alert for temperature deviations.
   • Tekan dan tahan butang ALERT - LO button to set the lower temperature alert limit. Use + dan - to adjust. Release the button to save.
   • Tekan dan tahan butang ALERT - HI button to set the upper temperature alert limit. Use + dan - to adjust. Release the button to save.
   • If the water temperature goes outside these set limits, an audible alarm will sound.
4. Switching Between Celsius and Fahrenheit: Tekan ke ° C / ° F button to toggle between Celsius and Fahrenheit temperature units.
5. Perlindungan Terlalu Panas: The dual-relay system automatically cuts power to the heater if the temperature exceeds a safe threshold, providing an additional layer of protection for your aquarium.

Penyelenggaraan

• Pembersihan tetap: Periodically wipe the controller unit with a dry, soft cloth to remove dust.
• Pembersihan Probe: Gently clean the temperature probe regularly to prevent algae or mineral buildup, which can affect accuracy. Use a soft brush or cloth and aquarium water. Do not use harsh chemicals.
• Pemeriksaan Kabel: Regularly inspect all cables and connections for any signs of wear, fraying, or damage. Replace if necessary.
• Kitaran Kuasa: If the unit behaves erratically, try unplugging it from the power outlet for a few minutes, then plug it back in. This can often resolve minor issues.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

The Finnex HC-810M Digital Heater Controller comes with a 180-Day Manufacturer's Warranty dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

Apa yang TIDAK Dilindungi: This warranty does not cover damage resulting from accident, misuse, abuse, improper installation, unauthorized repair or modification, or failure to follow the instructions in this manual.

Untuk Mendapatkan Perkhidmatan Waranti: Please retain your proof of purchase. For warranty claims or technical support, please contact Finnex customer service directly. Refer to the official Finnex webtapak atau pembungkusan produk anda untuk mendapatkan maklumat hubungan terkini.

For additional information and support, visit the official Finnex webtapak atau hubungi peruncit anda.