RAB Lighting GT500 Motion Sensor Light Outdoor Instruction Manual

1. Maklumat Keselamatan Penting

Please read these instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards, which could cause property damage, serious injury, or death.

• AMARAN: Risiko Renjatan Elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.
• Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik nasional dan tempatan.
• Pastikan bekalan voltage is correct for the fixture (120V or 277V).
• Jangan pasang berhampiran bahan mudah terbakar.
• This device is designed for outdoor, wet-rated locations.
• Use only with PAR38 flood lamps up to 150W max.

2. Produk Lebihview

The RAB Lighting GT500W is a hardwired outdoor motion sensor designed to provide reliable security lighting. It features a 110-degree detection range and is compatible with 120V and 277V systems, supporting up to 600W at 120V and 1350W at 277V. Its durable polycarbonate housing and 6000V surge protection ensure long-term performance in various weather conditions.

Rajah 2.1: Depan view of the RAB Lighting GT500 Motion Sensor Light.

Ciri-ciri Utama:

• Pengesanan Pergerakan Boleh Dipercayai: 110° coverage for dependable security.
• Dwi Voltage Keupayaan: Supports 120V and 277V installations.
• Heavy-Duty Surge Protection: Built with 6000V surge protection.
• Pembinaan Tahan Lama: Polycarbonate housing for wet-rated outdoor performance.
• Adjustable Timing: Run time from 10 seconds to 15 minutes.
• Pembatalan Manual: 6-hour protected manual override for continuous light.
• Lamp Keserasian: Designed for PAR38 flood lamps up to 150W max.

3. Pemasangan (Persediaan)

Before beginning installation, ensure all power is disconnected at the circuit breaker or fuse box. This device is designed for wall mount installation.

3.1 Pemasangan

1. Select a suitable mounting location, typically 8-15 feet above the ground, ensuring the sensor has an unobstructed view of the desired detection area.
2. Securely attach the sensor to a junction box using appropriate hardware (not included). Ensure a watertight seal for outdoor applications.

3.2 Pendawaian

The GT500W sensor is hardwired and supports both 120V and 277V electrical systems. Refer to the wiring diagram below and consult a qualified electrician if unsure.

Figure 3.1: Wiring connections for the GT500W sensor. Black wire for Line, White for Neutral, Red for Load.

• Sambungkan HITAM wire from the sensor to the TALIAN (PANAS) wayar daripada bekalan kuasa.
• Sambungkan PUTIH wire from the sensor to the NEUTRAL wayar daripada bekalan kuasa.
• Sambungkan MERAH wire from the sensor to the LOAD (fixture) wayar.
• Ensure all connections are secure and insulated with approved wire connectors.
• Pulihkan kuasa pada pemutus litar.

4. Operasi

The GT500W sensor automatically detects motion and activates connected lighting. It features adjustable settings for optimal performance.

4.1 Julat Pengesanan

The sensor provides a 110-degree field of view, detecting motion up to 70 feet away. The coverage area can be influenced by mounting height and environmental factors.

Figure 4.1: The 110-degree detection range of the GT500 sensor.

4.2 Melaraskan Tetapan

The sensor includes controls for adjusting the run time and sensitivity. These controls are typically located on the underside or side of the sensor unit.

Gambar 4.2: Cthample of adjustable sensitivity control.

• Pelarasan MASA: This dial controls how long the light remains on after motion is detected. Settings typically range from 10 seconds to 15 minutes. Turn the dial clockwise to increase the duration, counter-clockwise to decrease.
• SENSITIVITY Adjustment: This dial controls the sensor's responsiveness to motion. Turn the dial clockwise for higher sensitivity (detects smaller movements or at greater distances), and counter-clockwise for lower sensitivity (reduces false triggers).

4.3 Pembatalan Manual

The GT500W features a 6-hour protected manual override function, allowing the light to stay on continuously regardless of motion detection.

• To activate manual override, quickly turn the light switch OFF and then ON within 2 seconds. The light will remain ON for approximately 6 hours.
• To deactivate manual override and return to motion-sensing mode, quickly turn the light switch OFF and then ON again. The light will then operate based on motion detection and set time.

5. Penyelenggaraan

The RAB Lighting GT500W motion sensor is designed for minimal maintenance.

• Pembersihan: Bersihkan kanta sensor secara berkala dengan kain lembutamp cloth to remove dirt, dust, or debris that may obstruct detection. Do not use abrasive cleaners or solvents.
• Lamp Penggantian: If the connected PAR38 flood lamps fail, ensure power is disconnected before replacing them. Follow the lamp manufacturer's instructions for replacement.

6. Penyelesaian masalah

If the motion sensor light is not functioning as expected, refer to the following common issues and solutions:

7. Spesifikasi

8. Waranti dan Sokongan

8.1 Waranti Pengilang

The RAB Lighting GT500W Motion Sensor Light is covered by a Waranti pengilang selama 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, abuse, misuse, or unauthorized modification.

8.2 Sokongan Pelanggan

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support:

• Webtapak: www.rablighting.com
• telefon: Refer to the RAB Lighting webtapak untuk nombor hubungan semasa.
• e-mel: Refer to the RAB Lighting weblaman web untuk e-mel hubungan semasa.

Please have your model number (GT500W) and proof of purchase available when contacting support.