Brecknell SBI 140 Weight Indicator User Manual

pengenalan

The Brecknell SBI 140 is a versatile and cost-effective weight indicator designed for a wide range of non-trade weighing applications. Housed in a durable stainless steel and ABS case, this compact indicator features an easy-to-read five-digit LCD display. It is compatible with various Brecknell platform scales and can connect to up to four 350 ohm load cells. Key features include full duplex RS-232 output, NCI protocol for shipping software compatibility, and user-friendly push-button controls for essential functions.

Persediaan

1. Membongkar dan Pemeriksaan

Carefully remove the SBI 140 indicator and all accessories from the packaging. Inspect the unit for any signs of damage. Retain the packaging for future transport or storage.

2. Mounting the Indicator

The SBI 140 is supplied with a mounting bracket, allowing for flexible installation on a wall or bench. Secure the bracket to your desired location using appropriate fasteners (not included). Then, attach the indicator to the bracket.

Image: The Brecknell SBI 140 Weight Indicator shown with its included mounting brackets and connection cable, ready for installation.

3. Sambungan Kuasa

The SBI 140 can be powered by either the included AC adapter or four 'AAA' batteries. Connect the AC adapter to the indicator and a suitable power outlet, or install the batteries into the battery compartment located on the underside of the unit. Ensure correct battery polarity.

4. Connecting to a Platform Scale

Connect the SBI 140 indicator to a compatible platform scale using the provided cable. The indicator supports connection to a maximum of four 350 ohm load cells. Ensure the connection is secure.

5. Penentukuran Awal

The SBI 140 features front panel calibration for easy setup. Refer to the detailed calibration procedure in the separate calibration guide (if provided) or follow the on-screen prompts after initial power-on to ensure accurate weight readings.

Arahan Operasi

Imej: Depan view of the Brecknell SBI 140 Weight Indicator, showing the display and control buttons.

1. Power On/Off and Zero

• Tekan ke Hidup/Mati/Sifar butang untuk menghidupkan atau mematikan unit.
• When the indicator is on, press the Hidup/Mati/Sifar button briefly to zero the display. This sets the current weight to zero, useful before placing an item on the scale.

2. Fungsi Tare

• Place an empty container or packaging material on the scale platform.
• Tekan ke Tare button. The display will show zero, and the tare weight will be subtracted from subsequent measurements. This allows for net weight measurement.
• Untuk membersihkan tare, keluarkan semua barang daripada penimbang dan tekan butang Tare butang lagi.

3. Unit Switching (kg/lb)

• Tekan ke Unit button to toggle between kilograms (kg) and pounds (lb). The display will indicate the currently selected unit.

4. Fungsi Tahan

• Tekan ke Hold/Print button to activate the hold function. This will freeze the current weight reading on the display, even if the item is removed from the platform.
• Tekan ke Hold/Print button again to release the hold function.

5. Auto Zero Tracking

The SBI 140 features automatic zero tracking, which maintains the zero display within a specified range, compensating for minor fluctuations or debris on the scale platform.

6. Ciri Automatik

To conserve battery life, the indicator will automatically switch off after 2 minutes of inactivity. This feature helps extend the operational time when using battery power.

7. Output RS-232

The full duplex RS-232 output allows the SBI 140 to connect to external devices such as printers or computers. It supports standard NCI protocol, enabling interface with common shipping software like UPS Worldship Online and FedEx.

Penyelenggaraan

1. Pembersihan

To clean the SBI 140, use a soft, damp cloth with a mild detergent. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the display or internal components. Ensure the unit is powered off and disconnected from any power source before cleaning.

2. Penggantian Bateri

If the indicator is powered by batteries and the display becomes dim or the unit fails to power on, it may be time to replace the batteries. Open the battery compartment, remove the old 'AAA' batteries, and insert new ones, ensuring correct polarity. Dispose of used batteries responsibly.

Menyelesaikan masalah

If you encounter issues with your Brecknell SBI 140 Weight Indicator, please review langkah penyelesaian masalah biasa berikut:

• Tiada Paparan/Unit Tidak Dihidupkan: Check the power source. If using the AC adapter, ensure it is securely plugged into both the indicator and a working outlet. If using batteries, ensure they are correctly installed and not depleted.
• Bacaan Tidak Tepat: Verify that the scale platform is stable and level. Ensure no objects are touching the platform or indicator. Perform a recalibration if necessary, following the calibration instructions.
• Display Shows 'OVERLOAD' or 'UNDERLOAD': This indicates the weight on the platform is outside the scale's capacity. Remove or add weight as appropriate.
• Communication Issues (RS-232): Check the RS-232 cable connection between the indicator and the external device. Ensure the correct communication settings are configured on both devices.

If these steps do not resolve the issue, please contact Brecknell customer support for further assistance.

Spesifikasi

Waranti dan Sokongan

For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official Brecknell website. For technical support, service, or replacement parts, please contact Brecknell customer service directly. When contacting support, please have your product model number (SBI 140) and item model number (52751-0556) available.