Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim User Manual

pengenalan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P8057-36 is an eyeball trim designed for use with Progress Lighting 4-inch recessed lighting housings. It features a 360-degree rotation and a 30-degree tilt capability, allowing for adjustable light direction.

Arahan Keselamatan Penting

AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada kotak fius atau pemutus litar sebelum pemasangan atau servis.

• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC).
• Rujuk juruelektrik bertauliah jika anda tidak pasti tentang proses pemasangan.
• Ensure the trim is compatible with your existing recessed housing. This trim is designed for 4-inch recessed housings.
• Jangan melebihi wat maksimumtage dinyatakan untuk lamp. This trim is for use with 50-watt 12V MR-16 lamps.
• Handle the trim and lamp dengan berhati-hati untuk mengelakkan kerosakan.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 1 x P8057-36 Recessed Eyeball Pinhole Trim (Chestnut finish)
• Panduan Pemasangan (dokumen ini)

Note: Recessed housing and lamp (50-watt 12V MR-16) are sold separately.

Persediaan dan Pemasangan

This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure power is OFF before proceeding.

1. Sediakan Perumahan: Ensure the recessed housing is properly installed and wired according to local electrical codes. The housing should be a 4-inch model compatible with 12V MR-16 lamps.
2. Pasang Lamp: Carefully insert a 50-watt 12V MR-16 lamp ke dalam lamp holder within the recessed housing. Ensure it is seated securely. (Lamp tidak termasuk)
3. Insert the Trim: Align the P8057-36 eyeball trim with the opening of the recessed housing. Gently push the trim upwards until the retention clips (if present on your housing) engage and hold the trim firmly in place.
4. Selamatkan Trim: Ensure the trim is flush with the ceiling surface. Adjust as necessary.
5. Pulihkan Kuasa: Once the trim is securely installed, restore power at the circuit breaker.

Image: The P8057-36 Recessed Eyeball Pinhole Trim in Chestnut finish. This image shows the front view of the trim, highlighting its adjustable eyeball design.

Operasi

The P8057-36 trim allows for directional lighting adjustment.

• Melaraskan Arah Cahaya: Gently grasp the outer ring of the eyeball and rotate it 360 degrees to direct light horizontally.
• Tilting the Eyeball: The eyeball can be tilted up to 30 degrees to aim light vertically. Carefully push or pull the eyeball to achieve the desired angle.

Note: Avoid excessive force when adjusting the eyeball to prevent damage to the mechanism.

Penyelenggaraan

• Pembersihan: Disconnect power before cleaning. Wipe the trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Lamp Penggantian: Disconnect power before replacing the lamp. Benarkan lamp to cool completely. Carefully remove the old MR-16 lamp and insert a new 50-watt 12V MR-16 lamp. Ensure the new lamp is securely seated before restoring power.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

Waranti Pengilang: This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Progress Lighting customer service. Refer to the official Progress Lighting webtapak untuk maklumat hubungan terkini.

Anda boleh melawat Kedai Pencahayaan Progress di Amazon untuk maklumat lanjut tentang produk mereka.