Auna C8-CB200-9A Active Design Bass Tube Subwoofer User Manual

1. Pengenalan

Terima kasih kerana membeliasing the Auna C8-CB200-9A Active Design Bass Tube Subwoofer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new audio system component. Please read this manual thoroughly before use and retain it for future reference.

2. Arahan Keselamatan

To prevent injury or damage to the unit, please observe the following safety precautions:

• Keselamatan Elektrik: Always disconnect the vehicle's battery before making any electrical connections. Ensure all wiring is correctly routed and secured to prevent short circuits or damage. Use appropriate fuse ratings as specified.
• Persekitaran Pemasangan: Install the subwoofer in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure the unit is securely mounted to prevent movement during vehicle operation.
• Perlindungan Pendengaran: Prolonged exposure to high volume levels can cause permanent hearing damage. Adjust the volume to a comfortable level.
• Pemasangan Profesional: Jika anda tidak pasti tentang mana-mana aspek pemasangan, rujuk profesional audio kereta yang berkelayakan.

3. Kandungan Pakej

Sila pastikan semua item ada dalam pakej:

• Auna C8-CB200-9A Active Design Bass Tube Subwoofer
• Pendawaian (Kuasa, Pembumian, Alat Kawalan Jauh, Input Aras Tinggi)
• Alat Kawalan Jauh Bass Boost
• Pendakap dan Skru Pemasangan
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

The Auna C8-CB200-9A is an active bass tube subwoofer designed to deliver powerful bass in your vehicle. It features an integrated amplifier and various controls for sound customization.

Kawalan dan Sambungan:

• HI-IN (High-Level Input): Connects directly to your car stereo's speaker outputs.
• LOW-IN (Low-Level Input): RCA inputs for connecting to your car stereo's pre-out (RCA) outputs.
• REM (Penghidupan Jauh): Connects to your car stereo's remote output to automatically turn the subwoofer on/off.
• +12V (Kuasa): Connects to the positive terminal of your car battery.
• GND (Tanah): Connects to a solid metal point on the vehicle chassis.
• JAUH: Integrated fuse for protection.
• DAPATKAN: Melaraskan sensitiviti input bagi amplebih hidup.
• L.P.F (Low Pass Filter): Adjusts the crossover frequency for the subwoofer.
• DASAR ASAS: Switch to enable or disable bass boost.
• PROT (Protection Indicator): Menerangi jika amplifier enters protection mode.
• PWR (Power Indicator): Bercahaya apabila amppenyambung dihidupkan.

5. Persediaan dan Pemasangan

Pemasangan yang betul adalah penting untuk prestasi dan keselamatan yang optimum. Ikuti langkah-langkah ini dengan teliti:

5.1. Memasang Subwufer

1. Choose a suitable location in your vehicle, such as the trunk or behind a seat, ensuring it does not obstruct vision or movement.
2. Use the provided mounting brackets and screws to securely fasten the subwoofer to a stable surface. Ensure the mounting surface is strong enough to support the unit's weight (approximately 7 kg).

5.2. Sambungan Pendawaian

Before making any connections, disconnect the negative terminal of your vehicle's battery.

1. Sambungan Kuasa (+12V): Run a heavy gauge power cable (not included, typically 8-10 AWG) from the positive terminal of your car battery to the +12V terminal on the subwoofer. Install an in-line fuse holder (with an appropriate fuse, e.g., 20A-30A) as close to the battery as possible.
2. Sambungan Tanah (GND): Connect a short, heavy gauge ground cable from the GND terminal on the subwoofer to a clean, unpainted metal point on the vehicle's chassis. Ensure a good electrical contact.
3. Penghidupan Jauh (REM): Connect a thin wire from the REM terminal on the subwoofer to the remote output (usually blue/white wire) of your car stereo. This will turn the subwoofer on and off with your stereo.
4. Input Audio:
   • Input Aras Rendah (RCA): If your car stereo has RCA pre-outs, connect RCA cables from the stereo's subwoofer or full-range outputs to the LOW-IN terminals on the subwoofer.
   • Input Aras Tinggi (Aras Pembesar Suara): If your car stereo does not have RCA outputs, use the provided high-level input harness. Connect the speaker wires from your car stereo's rear speakers (or full-range outputs) to the HI-IN terminals on the subwoofer.
5. Bass Boost Remote Control: Connect the remote control cable to the dedicated port on the subwoofer's rear panel. Route the cable to a convenient location near the driver's seat.

Once all connections are made, reconnect the negative terminal of your vehicle's battery.

6. Arahan Operasi

After installation, follow these steps to configure and operate your subwoofer:

1. Turn on your car stereo. The PWR indicator on the subwoofer should illuminate.
2. Laraskan GAIN: Start with the GAIN control set to minimum. Play a familiar piece of music with strong bass. Slowly increase the GAIN until you hear distortion, then back it off slightly. The goal is to match the subwoofer's output level with the rest of your audio system.
3. Adjust L.P.F (Low Pass Filter): This control sets the upper frequency limit for the subwoofer. Typically, set it between 80Hz and 120Hz. Experiment to find the setting that blends best with your main speakers, ensuring a smooth transition from bass to mid-range frequencies.
4. Use BASS BOOST: The BASS BOOST switch on the subwoofer's rear panel can be used to enable or disable the bass boost feature. The external bass boost remote control allows you to fine-tune the bass level from your driving position.
5. Penalaan halus: Make small adjustments to the GAIN and L.P.F. settings until the bass sounds natural and integrated with your overall audio system.

7. Penyelenggaraan

Regular maintenance will help ensure the longevity and performance of your subwoofer:

• Pembersihan: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Do not use abrasive cleaners or solvents.
• Penggantian fius: If the subwoofer does not power on, check the in-line fuse near the battery and the fuse on the subwoofer's rear panel. Always replace a blown fuse with one of the exact same type and rating (e.g., 20A). Using a fuse with a higher rating can cause serious damage to the unit or vehicle.
• Semakan Sambungan: Periksa semua sambungan pendawaian secara berkala untuk memastikan ia selamat dan bebas daripada kakisan.

8. Penyelesaian masalah

If you experience issues with your subwoofer, refer to the following table for common problems and solutions:

If the problem persists after trying these solutions, please contact Auna customer support or a qualified technician.

9. Spesifikasi

10. Waranti dan Sokongan

Auna products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact your local Auna dealer or customer support. For technical assistance or service inquiries, please visit the official Auna webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Sila simpan bukti pembelian anda untuk tuntutan waranti.