pengenalan
The CDN Dual Sensing Programmable Probe Thermometer and Timer (Model DSP1) is designed to accurately measure both the internal temperature of food and the ambient temperature of your oven or grill. This versatile tool assists in achieving precise cooking results and ensuring food safety. It features a durable stainless steel probe and cable, a clear digital display, and programmable alarms.
Imej: Depan view of the CDN DSP1 thermometer with probe attached, displaying oven and food temperatures.
Ciri-ciri Utama
- Dual Sensing Probe: Measures both food and oven/grill temperatures simultaneously.
- Julat Suhu Luas: 32 hingga 572°F (0 hingga 300°C).
- Penggera Boleh Aturcara: Set desired temperatures for food and oven; an alarm sounds when reached.
- Fungsi Pemasa: Includes a 10-hour count up/down timer.
- Pembinaan Tahan Lama: 6.75-inch (17 cm) stainless steel probe with a 39-inch (1 m) sensor cable.
- Pemasangan Serbaguna: Features a magnet for metal surfaces and a fold-out stand for countertops.
- Pemilihan Unit: Tukar antara Fahrenheit dan Celsius dengan mudah.
- Kuasa: Operates on 1 AAA battery (included).
Persediaan
- Pemasangan Bateri:
Locate the battery compartment on the back of the unit. Insert one AAA battery, ensuring correct polarity. The display will activate.
- Sambungan Probe:
Insert the stainless steel probe's jack firmly into the port on the side of the thermometer unit.
Image: The CDN DSP1 thermometer with its probe securely plugged into the side port.
- penempatan:
Position the thermometer unit using either the magnetic back to attach it to a metal surface (e.g., oven door, refrigerator) or extend the fold-out stand for countertop use.
Imej: Belakang view of the CDN DSP1 thermometer, highlighting the integrated magnet and the fold-out stand for versatile placement.
Arahan Operasi
Pengukuran Suhu
- Sisipkan Probe: Carefully insert the tip of the probe into the thickest part of the food, avoiding bone or gristle. For oven temperature, position the probe tip within the oven cavity, ensuring the cable is not pinched.
- Hidupkan kuasa: Tekan ke HIDUP/MATI button to activate the thermometer.
- Pilih Unit: Tekan ke °F/°C butang untuk menogol antara paparan Fahrenheit dan Celsius.
- Set Food Temperature Alarm:
- Tekan ke MODE button until "FOOD" is selected.
- Tekan ke DAGING button to cycle through pre-programmed meat types (e.g., Beef, Pork, Chicken) or press SET to manually adjust the target temperature using the HR dan MIN butang.
- Tekan ALERT ON/OFF to activate the alarm. The alarm will sound when the food reaches the set temperature.
- Set Oven Temperature Alarm:
- Tekan ke MODE button until "OVEN" is selected.
- Tekan SET to manually adjust the target oven temperature using the HR dan MIN butang.
- Tekan ALERT ON/OFF to activate the alarm. The alarm will sound when the oven reaches the set temperature.
Fungsi Pemasa
- Pilih Mod Pemasa: Tekan ke MODE button until "TIMER" is selected.
- Tetapkan Masa: Gunakan HR dan MIN butang untuk menetapkan masa undur yang diingini (sehingga 10 jam).
- Mula/Berhenti: Tekan ke MULA/BERHENTI button to begin or pause the countdown.
- Tetapkan semula: To clear the timer, press and hold the MULA/BERHENTI butang.
Penyelenggaraan
- Membersihkan Probe: Selepas setiap penggunaan, lap probe keluli tahan karat dengan iklanamp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the probe cable connector or the main unit in water.
- Membersihkan Unit: Lap unit termometer dengan kain lembut,amp kain. Jangan gunakan pembersih yang melelas atau rendam unit di dalam air.
- Storan: Store the thermometer and probe in a clean, dry place when not in use. Ensure the probe cable is not kinked or damaged.
- Penggantian Bateri: Gantikan bateri AAA apabila paparan menjadi malap atau tidak responsif.
Image: The CDN DSP1 thermometer and its probe laid out on a wooden cutting board, ready for use or cleaning.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada paparan atau paparan malap | Bateri rendah atau mati; pemasangan bateri yang salah. | Gantikan bateri AAA, memastikan kekutuban yang betul. |
| Bacaan suhu tidak tepat | Probe not fully inserted; probe or cable damage; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the food. Avoid bone. Inspect probe and cable for damage. If damaged, replace the probe. |
| Penggera tidak berbunyi | Alarm function not activated; volume too low. | Tekan ke ALERT ON/OFF button to activate. Check for any volume settings (if applicable, though this model typically has a fixed alarm). |
| Probe not registering temperature | Probe not properly connected to the unit. | Ensure the probe jack is firmly seated in the port. |
Spesifikasi
- model: DSP1
- Julat Suhu: 32 hingga 572°F (0 hingga 300°C)
- Panjang Probe: 6.75 inci (17 cm)
- Panjang kabel: 39 inci (1 m)
- Sumber Kuasa: 1 x bateri AAA (termasuk)
- Jenis Paparan: LCD Digital
- Bahan: Acrylonitrile Butadiene Styrene (ABS) casing, Stainless Steel probe and cable
- ciri-ciri: Dual sensing, programmable alarms, timer, magnet/stand mounting
- Dimensi (Unit): Approximately 7.5 inches (H) x 3 inches (W) x 0.625 inches (D)
Image: The CDN DSP1 thermometer with key dimensions indicated, showing its compact size.
Maklumat Waranti
CDN products are manufactured with quality materials and craftsmanship. For specific warranty details and terms, please refer to the documentation included with your product or visit the official CDN webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.
Sokongan
For further assistance, product inquiries, or technical support, please contact CDN customer service. Contact information can typically be found on the product packaging or the official CDN webtapak.
Pengeluar: CDN
Webtapak: www.cdn-timeandtemp.com
telefon: 800-338-5594
