Dennerle - Complete Long-Term CO2 Test Correct + pH

Produk Selesaiview

The Dennerle Correct Long-Term CO2 Test + pH is designed for precise and reliable measurement of CO2 content in aquarium water. This test utilizes a unique six-colorimetric scale, allowing direct reading of CO2 concentration in milligrams per liter. Unlike conventional CO2 tests that mix aquarium water with the indicator, the Dennerle Correct test uses a special ready-to-use indicator solution, ensuring accurate results by preventing distortion from humic acids or nitrates present in aquarium water.

Image: Dennerle CO2 Long-Term Test Correct + pH product packaging, showing the test unit and indicator vials.

Kandungan Pakej

• 1 x Dennerle CO2 Long-Term Test Unit
• 5 x Special CO2 Indicator Solution Vials
• 1 x Colorimetric Scale Chart
• Manual Arahan

Arahan Persediaan

1. Prepare the Test Unit: Carefully open the Dennerle CO2 long-term test unit. It consists of two parts that fit together.
2. Add Indicator Solution: Take one vial of the special CO2 indicator solution. Pour the entire contents of the vial into the lower chamber of the test unit. Do not mix with aquarium water.
3. Pasang Unit: Securely close the test unit, ensuring a tight seal.
4. Penempatan di Akuarium: Attach the suction cup to the back of the test unit. Place the unit inside your aquarium, ensuring it is fully submerged and positioned in an area with good water circulation, but not directly in the path of a strong filter outflow. It should be placed at a depth where it is easily visible for reading.
5. Penstabilan Awal: Allow the test unit to stabilize for at least 1-2 hours before taking the first reading. The indicator solution needs time to react with the CO2 in the aquarium water.

Image: The Dennerle CO2 long-term test unit, showing the indicator liquid inside.

Arahan Operasi

The Dennerle CO2 Long-Term Test continuously monitors the CO2 level in your aquarium. The indicator solution will change color based on the CO2 concentration. Regular observation is key to maintaining optimal CO2 levels for your aquatic plants and fish.

Membaca Keputusan:

Compare the color of the indicator solution in the test unit with the provided colorimetric scale chart. The chart displays various shades corresponding to different CO2 concentrations (in mg/L) and associated pH values.

• Biru: Indicates a CO2 deficiency. Your aquarium requires more CO2.
• hijau: Indicates optimal CO2 levels. This is the ideal range for healthy plant growth and fish well-being.
• Kuning: Indicates an excess of CO2. Reduce CO2 supply to prevent harm to fish.

Image: The Dennerle CO2 test unit alongside its colorimetric scale, showing different CO2 and pH levels.

Penyelenggaraan

For accurate and reliable results, the indicator solution should be replaced regularly. It is recommended to replace the solution approximately every 4-5 weeks, or sooner if the color appears faded or inconsistent.

1. Remove Unit: Carefully remove the test unit from the aquarium.
2. Empty Old Solution: Open the test unit and discard the old indicator solution.
3. Unit Bersih: Rinse the test unit thoroughly with clean water (preferably reverse osmosis or distilled water) to remove any residue. Do not use detergents or soaps.
4. Add New Solution: Pour the contents of a new indicator solution vial into the unit.
5. Pasang semula: Close the unit securely and place it back into the aquarium as per the setup instructions.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

Dennerle products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the official Dennerle webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

For further assistance, you may visit the Dennerle brand store on Amazon: Dennerle Store