Philips AVENT Classic Medium Flow Nipple Instruction Manual

Produk Selesaiview

The Philips AVENT Classic Medium Flow Nipple is designed for bottle-fed babies aged 3 months and older. Crafted from soft, durable, and flavorless silicone, this nipple facilitates a natural latch, making the transition between breast and bottle feeding smoother.

Ciri-ciri utama termasuk:

• BPA-Free construction for safety.
• Clinically proven to reduce colic and discomfort.
• An anti-colic valve that promotes active feeding and minimizes air intake, thereby reducing fussiness and colic.
• Three holes for a consistent medium flow, suitable for babies at least 3 months old.
• Each pack includes two medium flow nipples.

Image: Philips AVENT Classic Medium Flow Nipple, showing its transparent silicone construction and anti-colic valve design.

Persediaan dan Penggunaan Pertama

Sebelum Penggunaan Pertama:

1. Disassemble all components of the nipple and any associated bottle parts.
2. Wash all parts thoroughly in warm, soapy water.
3. Rinse all parts completely to remove any soap residue.
4. Sterilize the nipple and other bottle components. Refer to the "Maintenance and Cleaning" section for sterilization methods.

Perhimpunan:

To assemble the nipple with a Philips AVENT Classic bottle:

1. Insert the nipple into the screw ring from below, pulling it through until it is securely seated.
2. Ensure the anti-colic valve on the nipple aligns with the vent on the screw ring.
3. Screw the assembled nipple and screw ring onto the bottle.
4. Confirm all parts are securely fastened to prevent leaks.

Imej: Meletup view of Philips AVENT bottle components, illustrating how the nipple, screw ring, bottle, and cap fit together.

Operating Instructions (Feeding)

The Philips AVENT Classic Medium Flow Nipple is designed for babies 3 months and older. Always ensure the nipple's flow rate is appropriate for your baby's age and feeding needs.

1. Prepare formula or breast milk according to instructions.
2. Fill the sterilized Philips AVENT Classic bottle with the prepared liquid.
3. Attach the assembled nipple and screw ring securely to the bottle.
4. Before feeding, always check the temperature of the liquid by dripping a few drops onto your wrist. It should feel lukewarm, not hot.
5. Position your baby comfortably for feeding.
6. Ensure the anti-colic valve on the nipple is facing upwards during feeding to allow proper air circulation and reduce vacuum build-up.
7. Monitor your baby for signs of discomfort or excessive air intake. The anti-colic valve is designed to minimize these issues.
8. Jangan gunakan puting sebagai puting susu.
9. Penyedutan cecair yang berterusan dan berpanjangan boleh menyebabkan kerosakan gigi.

Image: A parent feeding a baby using a Philips AVENT bottle, illustrating a typical feeding scenario.

Penyelenggaraan dan Pembersihan

Proper cleaning and maintenance are crucial for hygiene and extending the life of your Philips AVENT Classic Medium Flow Nipple.

Pembersihan:

• Immediately after each use, disassemble the nipple and all bottle components.
• Wash all parts thoroughly in warm, soapy water using a soft brush or sponge. Pay special attention to the anti-colic valve and the inside of the nipple.
• Rinse all components under clean running water until all soap residue is removed.
• Note: This product is not specified as dishwasher safe. Hand washing is recommended.

Pensterilan:

Sterilize the nipple and other bottle parts using one of the following methods:

• Mendidih: Place all cleaned parts in a pot of boiling water for 5 minutes. Ensure there is enough water to cover all parts and prevent them from touching the bottom or sides of the pot, which could cause damage.
• Pensteril Wap: Use a Philips AVENT steam sterilizer or another suitable steam sterilizer according to its instructions.
• Pensterilan Air Sejuk: Use a cold water sterilization solution according to the manufacturer's instructions.

Storan:

Store cleaned and sterilized nipples in a dry, covered container away from direct sunlight and heat.

Pemeriksaan:

Before each use, inspect the nipple for any signs of wear, tear, stickiness, or damage. Pull the nipple in all directions to check for weakness. Discard and replace the nipple immediately if any damage is observed, as this could pose a choking hazard.

Menyelesaikan masalah

Spesifikasi Produk

Waranti dan Sokongan

For specific warranty information regarding your Philips AVENT Classic Medium Flow Nipple, please refer to the packaging or contact Philips AVENT customer support directly. Keep your proof of purchase for any warranty claims.

For further assistance, product inquiries, or troubleshooting not covered in this manual, please visit the official Philips AVENT webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Sokongan dalam talian: www.philips.com/avent